Hornady
Hornady 095340 Lock-N-Load Rifle Bullet Feeder 7/8"x14 Threaded Dies Red
- SKU:
- 095340
- UPC:
- 090255953404
- MPN:
- 095340
Description
Turn a standard reloading press into a mini‑ammo factory with Hornady’s case‑activated Rifle Bullet Feeder. The solid‑steel collets and 7/8"‑14 thread let the bullet drop only when the case makes contact, so you get a clean feed, seat, and crimp in a single motion. That simple action can shave up to half the cycle time compared to manual feeding, especially once you hit a rhythm on the bench.
Because the feeder is built for .22‑caliber projectiles, it’s a perfect match for most .22 LR loads you’ll see on the range or in the field. If you need to step up to 30‑caliber cartridges, Hornady sells a conversion kit that swaps the die body while keeping the same thread and feed mechanism. The feeder also plays nicely with the Dillon XL‑650 press, expanding its usefulness beyond the Lock‑N‑Load® AP platform.
Key features
- 7/8"‑14 die thread – Fits the common 7/8"‑14 thread found on Lock‑N‑Load® AP presses and other compatible reloading presses, so you can swap it in without extra adapters.
- Case‑activated feeding – The bullet only drops into the die when a case contacts it, eliminating double‑feeds and speeding up the seat‑and‑crimp cycle.
- Solid‑steel collets – Durable collets hold the bullet firmly through feeding, seating, and crimping, delivering consistent headspacing over thousands of loads.
- Designed for .22 caliber – Optimized for .22‑caliber bullets; a separate 30‑caliber conversion kit is sold separately for larger cartridges.
- Compatible with Dillon XL‑650 – The feeder works with the Dillon model XL 650 press, giving you flexibility if you own multiple press platforms.
- Cast lead bullets prohibited – Hornady specifies that cast lead bullets must not be used in this feeder, protecting the die from damage.
Specifications
| Brand | Hornady |
| Caliber / Gauge | 22 caliber |
| Product name | Lock‑N‑Load Rifle Bullet Feeder |
| Model / MPN | 095340 |
| UPC | 090255953404 |
| Thread size | 7/8"‑14 |
| Compatible press | Lock‑N‑Load® AP press; other presses with 7/8"‑14 threads; Dillon XL‑650 |
| Conversion kit availability | 30‑caliber conversion kit sold separately |
| Material – collets | Solid steel |
| Bullet type restriction | Cast lead bullets not permitted |
What’s included
- 1 × Rifle Bullet Feeder die (7/8"‑14)
- Instruction PDF
Good to know
- Works with any press that uses a 7/8"‑14 die thread, not just Hornady’s AP press.
- Do not load cast lead bullets in this feeder; use factory‑finished or swaged bullets only.
- A separate 30‑caliber conversion kit is required for cartridges from .300 Savage up to .300 Rem Ultra Mag.
Additional Information
Brand: |
Hornady |
Cartridge (SAAMI): |
22-250 Remington |
Material: |
Steel |
Model: |
Lock-N-Load |
Package Quantity: |
1 |
Packaging Type: |
EA |
Primary Application: |
All Purpose |
Series: |
Rifle Bullet Feeder |
GTIN / UPC: |
090255953404 |
Dimensions: |
7/8"x14 Threaded Dies |
Finish: |
Red |
Overall Length: |
7.000 in |
Overall Width: |
8 in |