Lee

Lee 25/06 REM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.474 to 2.494 inches.

The Hex Ratchet fits inside the ratchet gear and needs to be replaced when the index rod does not seat properly.

Grips the shell for a firm fit in the press during reloading or priming operations. Will fit the Auto Prime and Auto Prime II.

Grips the shell for a firm fit in the press during reloading or priming operations. Universal shell holder used in most brands of reloading presses. Not for use with the Auto-Prime.

Grips the shell for a firm fit in the press during reloading or priming operations. Will fit the Auto Prime and Auto Prime II.

The Lee Precision 50 BMG Reloading Kit includes Lee's Classic Cast press, a full set of 50 BMG dies, shell holder and insert, ram prime tool and tube of case sizing lube, and both large and small...

Lee 41 MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.270 to 1.290 inches.

Lee 44 MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.265 to 1.285 inches.

Lee 9MM LUGER Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Works with the Cutter and Lock Stud or Zip Trim. Includes Shell Holder.

Grips the shell for a firm fit in the press during reloading or priming operations. Universal shell holder used in most brands of reloading presses. Not for use with the Auto-Prime.

A large, unbreakable funnel that fits all cases from .22 to .45 caliber and contains a hole in the flange that permits mounting to the Lee Turret Press, shelf or bench.

The Lee 90117 Case Length Gauge & Shell Holder is a premium reloading tool designed for the 270 Winchester Short Magnum (.270 WSM). Made from hardened steel with a silver finish, it provides precise...

Lee 7mm Express, 280 Remington, 280 Ackley Improved Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to...

Lee 357 MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.270 to 1.290 inches.

Lee 6MM REM / 244 REM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.213 to 2.233 inches.

Lee 6.5 Creedmoor Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.900 to 1.920 inches.

The Lee Auto-Disk Powder Measure Double Disk Kit raises the hopper of the Lee Pro Auto-Disk Powder Measure allowing reloaders to stack two disks. This doubles the powder capacity and enables very...

Grips the shell for a firm fit in the press during reloading or priming operations. Will fit the Auto Prime and Auto Prime II.

Grips the shell for a firm fit in the press during reloading or priming operations. Universal shell holder used in most brands of reloading presses. Not for use with the Auto-Prime.

Grips the shell for a firm fit in the press during reloading or priming operations. Universal shell holder used in most brands of reloading presses. Not for use with the Auto-Prime.

Grips the shell for a firm fit in the press during reloading or priming operations. Will fit the Auto Prime and Auto Prime II.

Lee 22 HORNET Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.383 to 1.403 inches. Made of steel...

The Lee Precision 90114 Case Length Gauge for .223 Remington and .223 Ackley Improved is engineered for simplicity and precision. It provides a precise and easy method to trim brass cases to length...

Grips the shell for a firm fit in the press during reloading or priming operations. Will fit the Auto Prime and Auto Prime II.

The Classic Lee Loader is a complete reloading system for .308 Winchester cartridges. This handy kit includes a sizing die, decapping chamber, bullet seater, priming chamber, priming rod, powder...

Lee Loader is a complete reloading system, kit includes everything needed to reload 45 Colt, except a rubber mallet.

Grips the shell for a firm fit in the press during reloading or priming operations. Universal shell holder used in most brands of reloading presses. Not for use with the Auto-Prime.

Lee 22 caliber decapper and base easily removes crimped in primers from military cases. This system works by driving the primer out with a hammer. Hammer not included. Material: Steel.

LEE 92381 MICROMETER FL DIE SET 303 BRITISH. This reloading dies & die sets features Brand: Lee; Cartridge (SAAMI): 303 British.

LEE 92399 MICROMETER FL DIE SET 300 SAV. This reloading dies & die sets features Brand: Lee.

The Lee Precision 92115 Breech Lock Hand Press Kit provides a versatile, portable hand press solution for reloading .38 Special cartridges. Included are the Breech Lock Hand Press, Breech Lock...

This die body works with Lee's Deluxe Quick Trim Case Trimmer to quickly and precisely trim brass to the correct length at the same time it chamfers the inside and outside of the case mouth. No...

Lee's Power Deluxe Quick Trim, trims and chamfers in a matter of seconds. It includes power Quick Trim adapter, chip catcher, and deluxe cutter assembly.

Lee's Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The...

Lee Primer Pocket Cleaners double ended design cleans both large and small primer pockets so that primers can be fully seated for better accuracy and safety. *Will not work on the 204 Ruger or 50 BMG...

Lee 260 REM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.015 to 2.035 inches.

This Factory Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp groove, as the...

Lee's Carbide 3-Die Set includes Carbide Full Length Sizing Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee complete reloading tool for 20 gauge with 24 shot and powder bushings. Loads 2 3/4" and 3" shells.

The Lee Precision 90865 Carbide Factory Crimp Die for 45 Colt (LC) / 454 Casull sizes the cartridge while crimping to ensure every round chambers freely with factory-like dependability. It features...