Odin Works

The RUNE is the latest addition to the ODIN Works modular, free-float rail systems. With its sleek and simple design, it fits comfortably into your hand allowing for quick and accurate target...

The Odin Works FSXSA15TABLK Tangent Forend is a 15.5" long forend made from 6061 aluminum with an anodized black finish. It is compatible with the Sig Cross Rifle, designed to provide durability and...

The 22 ARC brings exceptional power and performance, packed into a compact cartridge that fits into AR-15's but is equally at home in a bolt action. By utilizing the new 62 gr. ELD-VT bullet, the 22...

The Ragna is a complete change from past forends. Designed for the fastest install possible, the RAGNA features a one piece barrel nut with no shims or clocking needed. Available in 12.5, 15.5, and...

The Odin Works XMR (eXtended Magazine Release) is a flagship product machined from billet 6061 aluminum with a Cerakote Flat Dark Earth finish. It is 4 times larger than a mil-spec button, designed...

The Odin Works BPPRIZMARCARG Precision Bipod in Ranger Green is made from 6061 aluminum and 303 stainless steel. It features vertical height adjustment from 4.0 to 14.50 inches, two legs, and...

Securely mount your glass for a precise and reliable shooting experience. Machined from rugged, lightweight 7075 Aluminum with Type III Matte Black Anodized finish. Available in low ring height for...

The ODIN WORKS Sideways ARCA Flex Rail for M-LOK is a compact mounting solution designed to add ARCA-style compatibility to M-LOK equipped setups. Built for a low-profile fit, it helps provide a...

The ZULU 2.0 stock combined with the ODIN Works padded intermediate buffer tube creates a complete stock suitable for rifle or carbine builds. Machined from 6061 aluminum with ergonomics and function...

The ATLAS features a 3-piece modular design that makes installation simple and fast. The core and the cap are machined from 416R stainless steel and black nitrided while the sleeve is made from...

The O2 Lite is the latest and lightest of all the ODIN Works Forends. Precision machined from 6005-T651 aluminum, it is a full 20% lighter than its predecessors. The forend measures 15.5 inches,...

The ODIN Works AR-10 bolt carrier group is designed for multi caliber use. Will work with .308, 6.5 CM, 6 CM, and any other caliber using that size of case head. Smaller diameter firing pin and pin...

The Odin Works XMR 3 Extended Magazine Release is an enhanced release button designed to provide faster, more positive magazine changes on AR-pattern rifles. Built from billet 6061 aluminum and...

Odin Works ACC65BCG Bolt Carrier Group Type 2 6.5 Grendel Black Nitride. This parts features Brand: Odin Works; Model: Bolt Carrier Group; Material: 9310 Steel; Finish: Nitride; Series: Type 2.

The Odin Works ATLAS Compensator features a 3-piece modular design that makes installation simple and fast. The core and the cap are machined from 416R stainless steel and black nitrided while the...

The ODIN Works ACC223BCG Bolt Carrier Group in Black Nitride is a Mil-Spec .223-face BCG designed for AR-15 platforms. It combines Case Hardened 8620 steel construction with a Black Nitride finish...

The Odin Works GB-75 is a low profile gas block made to fit barrels with a .750-inch diameter at the gas block location. Constructed from carbon steel and finished with black nitride, it is...

The ARCA rail was designed to give you the flexibility and ease of use that you need for mounting your rifle. This rail system is commonly used for mounting Arca Swiss style tri-pods but it also can...

ODIN ACC-ML-ARCA-RAIL-4 M-LOK TO ARCA RAIL 4. This parts features Brand: Odin Works; Finish: Matte.

The Odin Works GBADJ875 Gas Block Low Profile .875" Black Nitride Carbon Steel is a tunable gas block with pin point adjustability, made from carbon steel with a black nitride finish for durability...

The ODIN Works ZULU 2.0 adjustable stock kit with padded intermediate buffer tube is built for an ambidextrous, length-of-pull adjustable AR-15 or carbine setup. Machined from 6061 aluminum for a...

Inspired by the ODIN Works O2 Lite, the XMR3 is the latest mag release available from ODIN Works. Machined from billet 6061 aluminum and designed to work with KNS pins and the BAD lever. The XMR3 has...

The Odin Works 02 Lite AR-10 M-LOK Forend is a 17.5-inch free-floating forend designed for AR-10 rifles with DPMS pattern uppers. Machined from 6005-T651 black anodized aluminum, it offers advanced...

M-LOK to Arca rail conversion, 9 inches long, machined from billet 6061 aluminum and hard black anodized. Provides a stable platform for attaching Arca-style accessories such as bipods, mounts, and...

The ARCA Rail was designed to give you the flexibility and ease of use that you need for mounting your rifle. Mount your Arca Swiss tri-pod or bi-pod, picatinny rail accessories, and a Harris bi-pod...

The Odin Works ATLAS Compensator family features a 3-piece modular design for easy and fast installation. The core and the cap are machined from 416R stainless steel and black nitrided, while the...

The Odin Works AR-10 Adjustable Buffer is designed to customize the weight combination for optimal AR-10 rifle performance. Constructed from 303 stainless steel, it includes aluminum, stainless...

The Odin Works Ambidextrous Modular Safety (AMS) for AR-15 and AR-9 rifles makes quickly changing from safe to fire extremely easy. The enlarged paddles allow you to easily find them when under the...

The Odin Works ACCXMRBLK Extended Magazine Release AR-15 is crafted from durable 6061 aluminum with a Cerakote black finish, designed to enhance the magazine release function on AR-15 and compatible...

Shooters wanted an ODIN Works XMR (eXtended Magazine Release) that worked with Magpul BAD levers. Machined from billet 6061 aluminum featuring the ODIN boomerang cuts, the XMR 2 is the one accessory...

Stainless steel tunable low profile gas block designed to perfectly tune your rifle with ease. Set it and forget it! Easily adjust for changing ammo or suppressor use. Made from durable 303 stainless...

The Odin Works Ambidextrous Modular Safety (AMS) for AR-15 and AR-9 rifles makes quickly changing from safe to fire extremely easy. The enlarged paddles allow you to easily find them when under the...

Odin Works GBADJ Gas Block Low Profile .750" Black Nitride Carbon Steel. This parts features Brand: Odin Works; Model: Gas Block; Finish: Nitride; Material: Carbon Steel; Series: Low Profile.

The Odin Works ACCXMR2FDE G2 Extended Magazine Release is a purpose-built upgrade for AR-15 shooters who want faster magazine changes without fighting a tiny factory button. This second-generation...