Odin Works
Odin Works MBATLAS65 Atlas Compensator 5/8-24 Threads 3" OAL 1" Diameter 6.5 Grendel
- SKU:
- MBATLAS65
- UPC:
- 857392006208
- MPN:
- MBATLAS65
Description
The Atlas’s three‑piece construction tackles the biggest headache with compensators – timing. The titanium sleeve slides over the stainless‑steel core, letting you set the optimal venting angle without fiddling with shims. Once set, the assembly bolts straight onto a 5/8‑24‑threaded 6.5 Grendel barrel, so you’re ready for the range in minutes. Stainless‑steel 416R gives the core and cap the strength needed to survive repeated firing cycles, while the black nitride finish adds corrosion resistance and a low‑glare appearance. The titanium sleeve not only handles the fine‑tuning but also keeps the overall weight down, helping the rifle stay balanced. At three inches overall and a one‑inch diameter, the Atlas stays compact enough for tight‑clearance builds yet provides enough surface area to divert gases and cut muzzle rise. Its modular design means you can disassemble for cleaning or replace a worn piece without swapping the entire device.
Key features
- 416R Stainless Steel Core & Cap – Machined from 416R stainless steel for strength and corrosion resistance, then black‑nitrided for a durable, low‑profile finish.
- Titanium Timing Sleeve – Titanium sleeve lets you fine‑tune recoil mitigation without shims or crush washers, keeping the install quick and repeatable.
- 5/8‑24 Threaded Muzzle – Standard 5/8‑24 thread fits directly onto 6.5 Grendel barrels, eliminating the need for adapters.
- Compact 3‑in OAL – At just three inches overall, the compensator adds minimal length while delivering effective muzzle rise reduction.
- Modular 3‑Piece Design – Core, cap, and sleeve separate for easy cleaning, part replacement, or swapping to a different configuration.
- Black Nitride Finish – The nitride coating provides wear resistance and a matte black look that blends with most AR‑15 builds.
Specifications
| Brand | Odin Works |
| Caliber / Gauge | 6.5 Grendel |
| Product name | Atlas Compensator |
| Model / MPN | MB-ATLAS-6.5 |
| UPC | 857392006208 |
| Cartridge (SAAMI) | 6.5 Grendel |
| Finish | Black Nitride |
| Material | Stainless Steel (core & cap) / Titanium (sleeve) |
| Mount Type | Direct Thread |
| Muzzle Device Type | Compensator |
| Diameter | 1.0 in |
| Weight | 124.7 gr |
| Threads | 5/8x24 |
| Series | Compensator |
What’s included
- 1 × Odin Works Atlas Compensator (core, cap, titanium sleeve)
- Owner’s installation guide
Good to know
- Fits any AR‑15 barrel threaded 5/8‑24 for 6.5 Grendel; also works on 6 mm calibers with the same thread pattern.
- No shims or crush washers required – the titanium sleeve provides all timing adjustments.
- Black nitride finish is resistant to wear and corrosion, but avoid abrasive cleaning agents to preserve the coating.
Additional Information
Brand: |
Odin Works |
Cartridge (SAAMI): |
6.5 Grendel |
Material: |
Stainless Steel |
Model: |
Atlas |
Mount Type: |
Direct Thread |
Muzzle Device Type: |
Compensator |
Overall Length: |
3.000 in |
Product Weight: |
124.7000 gr |
Series: |
Compensator |
Threads: |
5/8x24 |
GTIN / UPC: |
857392006208 |
Finish: |
Nitride |
Package Quantity: |
1 |
Packaging Type: |
EA |