Odin Works
Odin Works MBATLAS7 Atlas Compensator 5/8-24 Threads 3.06" OAL 1" Diameter 7.62
- SKU:
- MBATLAS7
- UPC:
- 856205005889
- MPN:
- MBATLAS7
Description
The Atlas compensator’s three‑piece modular build means the core, sleeve and cap are each machined from 416R stainless steel and then black‑nitride treated. That combination gives you a hard‑wearing, corrosion‑resistant part that still looks tactical. The porting is cut specifically for 7.62 mm NATO, so the gas venting is matched to the cartridge’s pressure curve, shaving off recoil and keeping the muzzle from jumping up after each shot. Installation is a snap: the device uses a 5/8×24 direct thread, the same thread you’ll find on most 7.62 mm barrels. No extra adapters or tools are needed—just torque it on and you’re ready to fire. At 3.06 in overall length and a 1‑in diameter, the compensator stays compact, preserving the rifle’s balance and keeping the hand‑guard clear for accessories. Because it’s a three‑piece system, any wear or damage can be addressed by swapping out the affected component rather than discarding the whole unit. This not only saves money over time but also lets you keep the same compensator geometry while tailoring the outer sleeve’s finish or color if you ever want a different look.
Key features
- 416R Stainless Steel Construction – 416R stainless steel offers high strength and corrosion resistance, ensuring the compensator holds up to sustained fire and harsh environments.
- Black Nitride Finish – The nitride coating provides a hard, wear‑resistant surface while keeping the part black for low‑visibility tactical use.
- 5/8×24 Direct Thread – Standard 5/8×24 threads allow quick, tool‑free installation on any 7.62 mm NATO barrel that uses this common thread size.
- Modular 3‑Piece Design – Core, sleeve, and cap are separate, so you can replace a damaged piece without swapping the entire unit.
- Caliber‑Matched Porting – Port geometry is tuned for 7.62 mm NATO, optimizing gas flow to cut recoil and muzzle climb for faster follow‑up shots.
- Compact 3.06‑in OAL – Short overall length keeps the weapon’s balance forward, aiding maneuverability in tight tactical scenarios.
Specifications
| Brand | Odin Works |
| Caliber / Gauge | 7.62 NATO |
| Product name | Atlas Compensator |
| Model / MPN | MB-ATLAS-7 |
| UPC | 856205005889 |
| Material | 416R Stainless Steel |
| Finish | Black Nitride |
| Color | Black |
| Muzzle Device Type | Compensator |
| Mount Type | Direct Thread |
| Thread Size | 5/8x24 |
| Caliber (SAAMI) | 7.62 NATO |
| Overall Length (OAL) | 3.060 in |
| Diameter | 1 in |
What’s included
- 1 × Odin Works Atlas Compensator (core, sleeve, cap)
- Owner’s manual
Good to know
- Fits any 7.62 mm NATO barrel with a 5/8×24 direct thread; verify thread pitch before installation.
- The nitride finish is hard but can be polished if you need a different surface texture; avoid abrasive cleaners that could damage the coating.
- Because the device is modular, replacement sleeves or caps are sold separately—keep the core for future upgrades.
Additional Information
Brand: |
Odin Works |
Cartridge (SAAMI): |
7.62 NATO |
Material: |
Stainless Steel |
Model: |
Atlas |
Mount Type: |
Direct Thread |
Muzzle Device Type: |
Compensator |
Overall Length: |
3.060 in |
Series: |
Compensator |
Threads: |
5/8x24 |
GTIN / UPC: |
856205005889 |
Color: |
Black |
Finish: |
Nitride |
Package Quantity: |
1 |
Packaging Type: |
EA |