1985 results for 'spring'

The Armaspec Gen 3 AR-9 Sound Mitigation Buffer is a single-stage captured drop-in replacement for your standard buffer and spring. The SMB is designed to keep the buffer spring from rubbing against...

The Armaspec SMB Kit includes the SMB GEN3 H3 captured buffer assembly, buffer tube (receiver extension), castle nut, and end plate, designed to provide a smoother recoil cycle and reduce buffer...

The Butler Creek 30280 Flip-Open Objective Scope Cover is a spring-loaded protective cap built for rifle scopes with a 48mm (1.890") objective bell. It delivers a watertight, airtight seal to keep...

HK LEM Trigger Kit for all USP and USP Compact pistols and all HK45 and HK45 Compact pistols. This universal factory Heckler & Koch LEM kit is complete with all of the parts required for the...

Hornady Lock N Load Auto Press Case Retainer spring. Quickly and easily remove and/or replace a case from the shell place at any point in the cycle. Case retainer spring fits all calibers. It's...

The Apex Duty/Carry Kit for the M&P Shield was designed to provide the Shield pistol owner a smooth, consistent trigger pull that is approximately 2 lbs lighter (based on variations in factory...

The Armaspec enhanced buffer tube kit contains all the necessary parts required to mount a stock assembly on to a lower receiver. The buffer tube kit contains a mil-spec 7075-T6 6 position buffer...

VKTR Industries WLA disconnect springs are designed for AR10 and AR15 fire-control groups, supporting reliable disconnector operation and consistent reset during repeated cycling. This 10-pack is...

True Precision recoil spring tuning kit for Sig Sauer P365 3.1" models designed to optimize recoil management and improve shooting performance. Made from high-strength chrome silicon, the kit...

The LBE Unlimited AR-15 Bolt Catch Plunger Spring 20-Pack is a must-have supply for gunsmiths, range armorers, and dedicated AR-15 builders alike. Manufactured from durable 1117 steel and finished in...

Uses existing magazines and recoil spring.

The Strike Forward Assist Plunger is made of lightweight aluminum for those looking to retain the functionality of a forward assist, while seeking weight savings wherever they can. The pawl is...

AR15 extractor O-ring ten-pack adds extra spring tension for positive case ejection in harsh conditions, ideal for BCG rebuilds, range repairs, and spare kits. Made in the USA. These O-rings install...

Balanced Shok-Buff recoil system kit for full-size 5" .45 ACP 1911 Government models. Includes two SHOK-BUFF buffers and one heavy duty recoil spring, with a silver steel finish. Intended for 230 gr...

These Brass Wool snap caps have a spring-loaded primer plunger which prevents firing pin damage during dry-firing exercises. Treat the wool chamber mop with your favorite gun oil to prevent rusty...

The SME SMEBPSPR Shooting Bipod has two spring-loaded, adjustable legs made of black anodized 6061-T6 aluminum with a length range of 6 to 9 inches. It mounts via a clamp to Picatinny/Weaver rails...

Enhance the performance of your Sig Sauer P365-FUSE with this premium recoil spring tuning kit from True Precision. Made from durable chrome silicon, these springs are designed for consistent...

The G.I. Tanto is a no-nonsense tactical knife built for practical uses with a broad Tanto point blade, integral quillon guard, and Polypropylene handle scales. Made from spring tempered 1055 carbon...

Optimize the performance of your Sig Sauer P365 XL or X Macro with a high-quality recoil spring kit from True Precision. Made from durable chrome silicon, these springs offer consistent performance...

This kit includes: Forward Assist Assembly, Forward Assist Retaining Pin, Forward Assist Spring, Ejection Port Cover, Ejection Port Cover Hinge Pin, Ejection Port Cover Retaining Clip, and Ejection...

Increase your SDS Imports MAC 1014 12 Gauge shotgun’s loaded capacity with this magazine extension tube. It installs using the included spring and extension tube to extend capacity to 7 rounds, while...

VKTR Industries AR-15 extractor spring insert 10 pack is a replacement part designed to support reliable extractor spring function on AR-15 pattern platforms. It is intended for service, maintenance,...

The Harris Bipods 25C1A2 Non-Swivel model is a shooting rest designed for bolt action rifles with a swivel stud attachment. It features spring-loaded folding legs adjustable from 13.5 to 27 inches in...

Birchwood Casey Universal 2-In-1 Gong Hanger fits on a standard 2 x 4 lumber post. It features a hardened steel hook, heavy duty powder coated finish and includes spring with bolt. One side has a...

Fab Defense's 43-10 is a magazine floor-plate replacement for the Glock 43 that adds 4 rounds for a total of 10 rounds in a magazine. The special ergonomic design enables secure manipulation of the...

Fab Defense's 43-10 is a magazine floor-plate replacement for the Glock 43 that adds 4 rounds for a total of 10 rounds in a magazine. The special ergonomic design enables secure manipulation of the...

The Armaspec AR-15 Gen 4 Stealth Recoil Spring is a drop-in replacement part for the buffer and spring on AR-15 platforms with carbine-length buffer tube. Features multi-stage design with no contact...

ProMag magazines are made in the USA and backed by a lifetime guarantee against manufacturer's defects. Magazine springs are precision wound using heat-treated chrome silicon wire and each and every...

The Sig Sauer P238 CA Compliant is a .380 ACP handgun with a 2.7" barrel and 6+1 capacity. It features a black hardcoat anodized aluminum beavertail frame, serrated stainless steel slide, gray...

The Blackhawk 410600PBK Single Mag Case is a matte black polymer magazine carrier designed for secure belt carry of double-stack magazines. It features a built-in tension spring for adjustable...

Finish your AR15 upper with this dependable Mil-Spec upper parts kit. Built from durable corrosion-resistant components it includes everything needed to complete a standard upper receiver and keep it...

The Luth-AR LRPK-308 is a complete lower parts kit for .308 AR platforms. This American-made kit includes all components needed to assemble a stripped AR-10 lower receiver, with parts that are...

Lantac M-SPEC Upper Parts Kit (UPK) for AR15 style rifles. Manufactured to the highest quality standards using correct materials, heat treatments and finishes to comply with up to date military...

The Smith & Wesson M&P Border Guard is a spring assist folding knife featuring a 4 inch high carbon stainless steel tanto blade with a black oxide coating. It includes a black steel handle with G10...

The Harris Bipods BRS Swivel BR Swivel Stud is a 6-9 inch adjustable bipod designed for bolt action rifles with Q.D. swivel stud attachments. Constructed from heat-treated steel and aluminum with a...

The Harris Bipods 251A2 Non-Swivel model attaches to swivel studs on most Q.D. stud-equipped bolt action rifles, featuring spring-loaded folding legs adjustable from 12 to 25 inches. Constructed from...

Lee's Pro Auto Disk Powder Measure has Elastomer wiper and teflon coated metal casting which makes this the smoothest operating measure. It will not cut powder and almost totally eliminates leakage...

The Sig Sauer P320 Slide Completion Kit provides all essential corrosion-resistant factory replacement parts to complete or refurbish your Sig P320 slide assembly. This kit includes extractor,...

The LaserMax LMSG419 Guide Rod Laser is designed specifically for Glock 19 Gen 4 pistols, replacing the factory spring guide assembly with a high intensity red laser sight for advanced target...

The UTG MNT-757 Accu-Sync Front Sight is a spring-loaded, flip-up front sight designed for AR-15 platforms. It features a precision machined aircraft aluminum construction with a matte black anodized...