AREA 419 FIREARMS

AREA 419 419-HUNT-120 HUNT 1" 20HI

(No reviews yet) Write a Review
SKU:
419-HUNT-120
UPC:
810080183056
MPN:
419-HUNT-120
$190.00

Description

The HUNT 1" 20HI rings are built for shooters who demand a low‑profile, ultra‑rigid mount on a Picatinny rail. The extra‑low 20 mm height drops the optic close to the rail, shaving off bulk and keeping the sight line tight—perfect for high‑recoil rifles where every ounce counts. Made from 7075 aerospace‑grade billet aluminum, the rings combine strength with feather‑light weight, and the Type 3 hardcoat anodize adds a hard, wear‑resistant surface while leaving the internal bore raw for a friction‑free fit.

Installation is straightforward: clean the rail, tube, and bore, then use a T20 Torx bit with a 45 in‑lb torque limiter for the caps and an 18 in‑lb limiter for the spacers. The stainless‑steel hardware stays rust‑free, and the final‑bore machining guarantees that the two halves of the ring stay true to each other, preserving your zero for years of shooting.

Because Area 419 matches and torques each set as a unit, you get a pair that’s been tested for consistency. No accessory attachment points keep the weight down, and the rings are ready to go straight from the box—just mount, torque, and hit the range.

Key features

  • 1‑inch (30 mm) tube diameter – Fits standard 1" optics without the need for adapters, keeping the optic’s eye relief tight and the sight picture clean.
  • Extra‑low 20 mm mount height – Positions the optic close to the rail for a lower profile, ideal for high‑recoil platforms where a lower center of gravity helps control.
  • 7075 aerospace‑grade aluminum – Provides a high strength‑to‑weight ratio, so the rings stay rigid under heavy recoil while adding minimal weight.
  • Type 3 hardcoat anodize – Durable finish resists wear and corrosion; the internal bore remains raw aluminum for a precise, friction‑free fit.
  • Stainless‑steel hardware – All screws and spacers are stainless, preventing rust and maintaining torque over the life of the rings.
  • Precision final‑bore machining – Each set is matched and torqued to spec, ensuring the rings stay true to each other and the optic stays zeroed.

Specifications

BrandArea 419 Firearms
Product nameHUNT 1" 20HI Scope Rings
Model / MPN419-HUNT-120
UPC810080183056
Material7075 Aerospace Grade Billet Aluminum (with Stainless Steel Hardware)
CoatingType 3 Hardcoat Anodize (internal bore raw aluminum)
Tube Diameter1" (30 mm)
Mount HeightExtra Low (20 mm)
Weight4 oz per set
Dimensions (L×W×H)5 × 4 × 2 in
Package Weight1 lb
CompatibilityPicatinny rail, 1" (30 mm) optic tubes
Required Installation ToolsT20 Torx bit, 45 in‑lb torque limiter (caps), 18 in‑lb torque limiter (spacers)

What’s included

  • 1 × HUNT 1" 20HI Scope Ring set (base + cap)
  • Stainless‑steel hardware (screws, spacers)
  • Installation instructions

Good to know

  • No accessory attachment points are included; if you need rails for accessories, consider Area 419’s MATCH or TACTICAL ring lines.
  • The internal bore is left raw aluminum; avoid using abrasive cleaning tools that could damage the finish.
  • These rings are sold as a matched set; mixing with rings from other manufacturers may affect torque and zero retention.
View AllClose

Additional Information

Brand:
Area 419 Firearms
Model:
419-HUNT-120
Mount Height:
1.4 in
GTIN / UPC:
810080183056
Mount Type:
Picatinny Mount
Finish:
Black
Package Quantity:
1
Packaging Type:
EA
View AllClose

0 Reviews

View AllClose