AREA 419 FIREARMS
AREA 419 419-ZERODIE-S6DA S-SERIES 6 DASHER DIE
- SKU:
- 419-ZERODIE-S6DA
- UPC:
- 810080183100
- MPN:
- 419-ZERODIE-S6DA
Description
The 7/8‑inch sizing die tackles the whole case—from neck to base—so you can pull consistent, tight neck tension on 6 mm Dasher brass. In testing the runout stayed under five‑ten‑thousandths of an inch, meaning your resized cases will feed flawlessly in the chamber.
Because it’s a die‑only offering, you’ll need a shellholder, but the die threads into any standard Redding, Hornady or RCBS holder and also mates with Area 419’s modular shellholder system. The package includes a universal die ring, a spare decapping pin and the small wrenches required for quick install or swap on the press.
At 2 lb and a 6 × 4 × 3‑in footprint, the die is sturdy yet easy to handle on the bench. Whether you’re pulling a few rounds or reloading a full box, the die’s solid construction and precise machining keep case dimensions repeatable, saving you time and ammo on the range.
Key features
- Die‑only package – No shellholder is included; the die fits common Redding, Hornady and RCBS holders, as well as Area 419’s own modular system.
- 7/8‑inch sizing die – Full‑length neck‑to‑base sizing for 6 mm Dasher cases, delivering sub‑0.0005 in neck runout on a batch of 100 brass.
- Weight 2 lb – Light enough for easy bench handling yet solidly machined for consistent case preparation.
- Compact dimensions – Measures 6 × 4 × 3 in, fitting comfortably on most reloading presses without crowding the work area.
- Universal die ring & spare decap pin – Comes with Area 419’s universal ring and a replacement decapping pin, plus the tools needed for installation and removal.
- Broad caliber compatibility – While listed for 6 mm Dasher, the die also supports a wide range of calibers (e.g., 6 BR, 6 GT, 6 Creedmoor, 6.5 PRC, 7 PRC, 308 Win, 300 PRC).
Specifications
| Brand | Area 419 |
| Caliber / Gauge | 6mm Dasher |
| Product name | ZERO S-Series 6mm Dasher Sizing Die |
| Model / MPN | 419-ZERODIE-S6DA |
| UPC | 810080183100 |
| Weight | 2 lbs |
| Dimensions (L × W × H) | 6 × 4 × 3 in |
| Series | ZERO S-Series |
| Product type | Sizing Die |
| Included accessories | Universal die ring, spare decapping pin, install/removal tools |
What’s included
- 1 × Area 419 ZERO S-Series 6mm Dasher Sizing Die
- Universal die ring
- Spare decapping pin
- Install/removal tools
Good to know
- The die is not compatible with Rock Chucker or Co‑Ax presses; it is intended for use with Area 419’s ZERO press or standard 7/8‑inch presses.
- All dies ship without a shellholder; purchase a compatible holder separately if you don’t already own one.
- Warranty is listed as lifetime on some retailer sites, but specific terms were not found in the manufacturer’s product page.
Additional Information
Brand: |
Area 419 Firearms |
Cartridge (SAAMI): |
22-250 Remington |
Die Type: |
Sizing |
Material: |
Stainless Steel |
Model: |
419-ZERODIE-S6DA |
GTIN / UPC: |
810080183100 |
Packaging Type: |
EA |
Package Quantity: |
1 |