AREA 419 FIREARMS

AREA 419 419-ZERODIE-S7PRC S-SERIES 7MM PRC DIE

(No reviews yet) Write a Review
SKU:
419-ZERODIE-S7PRC
UPC:
810080183223
MPN:
419-ZERODIE-S7PRC
$275.00

Description

The ZERO S‑Series 7 mm PRC die tackles the toughest part of case preparation – pulling the case to the base while keeping the neck perfectly concentric. Its 7/8‑inch sizing chamber works with the ZERO press’s standard turret, delivering a full‑length squeeze that leaves neck runout under .0005 in, as reported by users on the manufacturer’s site.

Because the die is sold without a shellholder, it’s designed to mate with the most common aftermarket holders – Redding, Hornady, RCBS – and of course the ZERO Modular Shellholder System. The included universal die ring, spare decapping pin, and install tools mean you can get it into the press without hunting for extra parts.

Weighting in at 2 lb and packaged in a 6 × 4 × 3 in box, the die is both robust and easy to store. Whether you’re building competition ammo or fine‑tuning a personal load, the ZERO S‑Series die gives you the precision and repeatability you need for the 7 mm PRC cartridge.

Key features

  • 7 mm PRC caliber – Specifically sized for the 7 mm PRC cartridge, delivering consistent neck tension and minimal runout for match‑grade loads.
  • 7/8‑inch die size – Fits the standard 7/8‑inch turret on the Area 419 ZERO reloading press, delivering full‑length case sizing to the base.
  • Die‑only package – No shellholder included; compatible with most aftermarket shellholders and the ZERO Modular Shellholder System.
  • Universal die ring included – Provides a ready‑to‑install mounting interface for the ZERO press without extra hardware.
  • Spare decapping pin & tools – All necessary install/removal tools are packaged, so you can get the die into the press right away.
  • Weight 2 lb, dimensions 6 × 4 × 3 in – Compact, sturdy construction makes storage easy and keeps the press’s weight balance optimal.

Specifications

BrandArea 419 Firearms
Caliber / Gauge7mm PRC
Product nameZERO S-Series 7 mm PRC Sizing Die
UPC810080183223
Weight2 lb
Dimensions (L × W × H)6 × 4 × 3 in
Die size7/8 in
CompatibilityWorks with common shellholders (Redding, Hornady, RCBS) and ZERO Modular Shellholder System
Included accessoriesArea 419 ZERO Universal Die Ring, spare decapping pin, install/removal tools
Package typeDie‑only (no shellholder)

What’s included

  • 1 × ZERO S-Series 7 mm PRC sizing die
  • Area 419 ZERO Universal Die Ring
  • Spare decapping pin
  • Install/removal tools

Good to know

  • Only compatible with the ZERO reloading press’s 7/8‑inch turret; not usable with Rock Chucker or Co‑Ax presses.
  • Threading on early BLEM runs may be short – use the standard non‑blem S‑Series die for full compatibility.
  • No shellholder is supplied; ensure you have a compatible aftermarket holder or the ZERO Modular Shellholder System.
View AllClose

Additional Information

Brand:
Area 419 Firearms
Cartridge (SAAMI):
7mm PRC
Die Type:
Sizing
Material:
Stainless Steel
Model:
419-ZERODIE-S7PRC
Packaging Type:
EA
Primary Application:
Target Match
GTIN / UPC:
810080183223
Finish:
Stainless
Package Quantity:
1
View AllClose

0 Reviews

View AllClose