Bravo

The Mod 2 fits on Mil-Spec carbine receiver extensions, and optimized for intermediate length receiver extensions (MK2, AR10, A5). These improved lines also enhance shooting in the prone position...

BCM Asymmetric MK2 Medium Latch Charging Handle crafted from Black 7075 T-6 Aluminum, designed with over a decade of feedback from real-world combat scenarios to enhance performance and reliability...

Driven by over a decade of feedback from real-world combat operations, BCM has made continual design refinements and structural improvements to the charging handle in the M4 and M16 to address the...

The Angled Kinesthetic Angled Grip (KAG) designed to complement modern shooting grips. It uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief...

This vertical keymod model 3 grip has a low-profile length for increased mobility and decreased "snag" factor. The forward angle increases the rigidity of the forearm, while providing a more natural...

Bravo's BCMGunfighter Compensator Mod 0 is designed to have much less side blast and noise compared to typical compensators, making it ideal for working in teams for close quarters battle (CQB). It...

This pistol grip features a hinged trap door which offers storage inside the grip with a water resistant rubber gasket. The grip includes both an extended modular insert to close the gap between the...

The BCM GFSMOD2SPMDFDE Stock Mod 2 SOPMOD in Flat Dark Earth Widebody by Bravo Company USA is an exceptional addition designed to enhance performance and comfort, with robust yet lightweight...

The BCMGunfighter Mod 3 Grip in Flat Dark Earth is a low-profile, forward-angled vertical grip designed to improve forearm rigidity and promote a more natural wrist position during use. Its flat...

Bravo Company BCMGUNFIGHTER Polymer KeyMod Rail (PKMR), Mid Length, Black, is a two-piece drop-in replacement handguard for AR-15 rifles with a Mid-Length gas system and Mil-Spec front sight base. It...

The BCMGUNFIGHTER AR-15 Enhanced Lower Parts Kit includes all the Mil-Spec quality components you expect from BCM, along with upgraded features: BCM PNT Trigger Assembly, BCM Pistol Grip, and Mod 3...

The BCM Gunfighter trigger guard for AR-15 lower receivers features an ergonomic shape and contoured design which enhances shooter comfort. Made from high-quality impact-resistant polymer and...

The BCM MCMR is a free float handguard that eliminates loads from the barrel, reducing the deflection for more accurate shooting. The MCMR features a M-Lok compatible mounting system, a steel barrel...

This vertical short grip has a low-profile length for increased mobility and decreased "snag" factor. The forward angle increases the rigidity of the forearm, while providing a more natural wrist...

The Angled Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips. It uses a biomechanically efficient forward rake to create an interface for positive retention and joint...

The BCM Gunfighter Kinesthetic Angled Grip (KAG) is made of high quality, impact resistant polymer with a flat dark earth textured finish. Designed to complement modern shooting grips, it uses a...

Bravo's KMR Alpha is constructed of aluminum with a hardcoat anodized finish for corrosion resistance and is free-floating. Its interface system was developed to work in parallel with the current...

The RAIDER is built using a double wall extrusion creating one of the most rigid free-float platforms in its weight class with M-Lok compatible mounting points. Its unique architecture balances...

The RAIDER is built using a double wall extrusion creating one of the most rigid free-float platforms in its weight class. Its unique architecture balances weight, rigidity, and capability,...

The A/T Optic Riser 525-13x5 is approximately 7-1/4 long and is intended to be used similarly to the 525-10x5 but offers 3 additional recoil slots for more flexibility. This riser has 13 recoil slots...

A/T Optic Riser 525-13 is approximately 5-3/4 long and covers the entire length of an upper receiver and offers one more recoil slot than the upper. This riser has 13 recoil slots (14 lugs). It can...

A/T Optic Riser 525-10x5 is approximately 6-1/8 long and offers a cantilever section for applications where the end user desires to run an attachment or optic over the handguard while avoiding...

A/T Optic Riser 525-11 is approximately 4-1/2 long and is intended to be used with an optic backed up by a magnifier or NVG or thermal depending on the number of recoil slots the mount takes up. This...

A/T Optic Riser 525-5 is approximately 2-1/8 long and is intended to be used with a red dot or other single optic or accessory. This riser has 5 recoil slots (6 lugs). All of our risers are the same...

The BCM MK2 Recoil Mitigation System Mod 1 T1 includes a MK2 T1 buffer, M16A4 action spring, M4 lock nut, MK2 receiver extension, and QD end plate. Constructed with 7075-T6 aerospace-grade aluminum...

BCM MK2RMS-M1T2 MK2 RECOIL MITIGATION MOD1 - T2. This stock / chassis features Brand: Bravo.

BCM RECCE-11 MCMR features a steel Government profile barrel with a manganese phosphate finish with a barrel length of 11.50" with MOD 0 Compensator, aluminum receiver with a hard-coat anodized...

The BCM Recce-16 MCMR is a 5.56x45mm NATO chambered rifle with a 16" government profile barrel finished with hard coat anodized and manganese phosphate for durability. It features a 6 position...

The Bravo Company RECCE-14 MCMR is a rugged, duty-ready AR-15 Rifle chambered in 5.56 NATO / .223 Remington, offering exceptional durability, precision, and combat-proven reliability. Designed around...

The Scout M-Lok Light Mount is designed for use with Surefire's Scout Light mounting interface. Multiple mounting holes is for ideal rail placement and easily mounts on the 3 or 9 o'clock rail...

Bravo Company USA (BCM) MCMR1913A3 3 Inch Picatinny Rail Section in Black Anodized finish. This rail section is designed for attaching accessories to compatible firearms, providing a durable and...

The Bravo Company Manufacturing BCM Low Profile Gas Block LGB-750 is built for .75in outer diameter barrels, offering a low-profile footprint with a black phosphate finish. It is manufactured with...

The A2X is an extended version of the A2 flash hider found on the M16 and M4 series of rifles. It is pre-drilled and comes with a dowel pin and crush washer for installation. Threaded 1/2"-28...

Fully ambidextrous, made to mount flush or cantilever off either the left or right side of the rail system the Scout KeyMod Light Mount is designed for use with Surefire's Scout Light mounting...