Flash Hiders

Dead Air DA301 KeyMo flash hider for 5.56x45mm NATO rifles features mass-shifted tines that prevent ringing ping and fits Sandman-L, Sandman-S, Sandman-K, Nomad-30, and Primal suppressors. It has...

The YHM Phantom Flash Hider is designed for 5.56mm cartridge. This five-port design has no downward facing port which helps eliminate dust problems when shooting in the prone position. It features...

SilencerCo's 3-prong flash hider is compatible with the ASR mounting system. It features a one hand on, one hand off attachment/detachment and patent-pending resonance suppression which effectively...

The SilencerCo AC141 ASR Flash Hider is a precision-engineered, durable black steel flash hider for 5.56x45mm NATO rifles featuring a 1/2"-28 tpi thread pattern. Equipped with patent-pending...

The SilencerCo ASR Flash Hider significantly suppresses muzzle flash, safeguarding the shooter’s vision, especially in low-light environments. Engineered for maximum effectiveness, this flash hider...

The Wilson Combat A2 Birdcage Flash Hider is a durable muzzle device designed for AR-15 rifles chambered in 5.56 NATO. It features a black phosphate finish and is engineered to reduce visible muzzle...

The SilencerCo AC1562 ASR Flash Hider is a black steel, 3-prong flash hider designed for 9mm firearms with 1/2"-36 tpi threads. It is compatible with SilencerCo's ASR (Active Spring Retention) quick...

SureFire's 3P Eliminator three-prong flash hider fits AR-10 weapons and variants with 5/8x24 muzzle threads. It features a patent-pending design that greatly reduces muzzle flash compared with a...

The 3P Eliminator three-prong flash hider fits M4/M16 weapons with 1/2x28 muzzle threads. It features a patent-pending design that reduces muzzle flash by typically greater than 99% compared to a...

The Dead Air DA122 Xeno Flash Hider is a lightweight, precision-focused muzzle device designed for repeatable suppressor mounting with a solid return to zero. It features a black nitride finished...

The KeyMicro Flash Hider is a short, lightweight flash hider suited for a variety of platforms. Designed for use with the KeyMicro Adapter, it functions as a minimalist flash hider on its own. When...

Dead Air's KeyMo Flash Hider reduces visible muzzle flash and serves as a solid mounting interface for Dead Air's premium suppressors, compatible with Sandman-L, Sandman-S, Sandman-K series,...

Dead Air's KeyMo Flash Hider reduces visible muzzle flash and serves as a solid mounting interface for Dead Air's premium suppressors, compatible with Sandman-L, Sandman-S, Sandman-K, Nomad-30, and...

Dead Air's Flash Hider has a unique patent-pending design featuring mass shifted equal length tines. The end result is a flash hider that does not ping. It is compatible with the Sandman-L,...

LanTac USA LLC, Lamprey, Plan B Hub Mount Flash Hider, 5.56 NATO, Threaded 1/2X28, QPQ Finish, Black, Short

The advanced SureFire SF3P-762-5/8-24 three-prong flash hider features a patent-pending design that greatly reduces muzzle flashtypically greater than 99%when compared with a plain muzzle. Boasting...

The KAK Industry A2 Birdcage 5.56 Flash Hider - 1/2x28 features a classic A2 birdcage design and is constructed using heat-treated steel and a corrosion-resistant phosphate finish for superior...

Griffin Armament Dual-lok Flash Hider is a 5/8x24 thread pitch flash suppressor designed for 30 caliber rifles to reduce muzzle flash and gas signature.

LBE Unlimited ARFH3PNG Three Prong Flash Hider Black 1215 Steel with 1/2"-28 tpi Threads for 5.56x45mm NATO AR-15. The Three Prong Flash Hider comes with a 5.56 crush washer and is made from 1215...

Constructed of 17-4 PH stainless steel, the taper mount minimalist flash suppressor has 3 flash suppressing tines with anti-resonance features integrated. It weighs 2.9 oz, approximately 40% less...

Upgrade your firearm with our modern take on the FN M249 SAW style flash hider muzzle device. Designed for superior flash suppression and recoil reduction, this muzzle device combines iconic style...

The Breek Arms Scorch 3-Prong Flash Hider is designed for 30 caliber firearms with a 5/8″x24 thread pattern. This high-performance muzzle device minimizes muzzle flash by effectively dispersing and...

The Faxon Firearms FFMD762A2 A2 Flash Hider in black nitride is built for 5/8x24 threaded barrels in 30 Cal configurations. The A2-style profile helps reduce visible muzzle flash while the black...

This Quick Detach (QD) flash hider muzzle device will allow a shooter to utilize any of the R556, R556A1, R556A2, R30A1, or R30A2 suppressors on weapons that have 5/8x24 muzzle threads. Featuring a...

Breek-LOK 3QD QD Suppressor Attachment system redefines quick-detach mounts delivering unmatched speed and simplicity. The Sentinel Caged Flash Hider reduces muzzle flash by dispersing and...

The Breek-LOK 3QD QD Suppressor Attachment system redefines quick-detach mounts, delivering unrivaled speed and simplicity. Its streamlined profile integrates seamlessly with any firearm for enhanced...

The Banish 30-caliber flash hider with 5/8x24 threads is a direct-thread muzzle device engineered to work with Banish 30 suppressors. It serves as a quick-change interface for .30-cal rifles for...

Plan B Scorch 3 Prong Flash Hider is a compact, low-profile 3-prong design engineered for the Plan B mounting system. It features precision-machined prongs and internal flash-cutter threads that...

The Luth-AR 308-BL06A2 is a classic A2-style flash hider and compensator designed for .308/7.62mm AR-10 and other AR-platform rifles chambered in 308 Winchester. Modeled after the iconic military A2...

Breek-LOK 3QD Compatible Muzzle Devices. The Breek-LOK 3QD QD Suppressor Attachment system sets the standard for quick-detach mounts, delivering unmatched speed and simplicity. Its streamlined...

The Faxon MUZZLOK Plan B Flash Hider delivers reliable muzzle control and flash signature reduction in a compact stainless steel design, engineered for 5/8x24 threading. It is machined from durable...

The One Horse A2 Flash Hider with Crush Washer (part no. OHFH02) is the classic A2-pattern birdcage flash hider scaled up for .30-caliber-family barrels, threaded 5/8×24 to fit chamberings such as ...

The Breek-LOK 3QD Scorch 3-Prong Flash Hider minimizes muzzle flash by dispersing and redirecting gases, aided by internal threads that enhance suppression beyond standard hiders. It reduces flash,...

Designed for steady, repeatable performance in varied environments, the KGM Suppressors A-QD-5FB-S-1 Quick Detach Flash Brake emphasizes functional reliability and straightforward operation...

BREEK ARMS DIRECT THREAD SUPPRESSOR HUB 5/8X24 STAINLES FEATURES: Slim 0.70″ × 1.49″ profile – adds only ~1/4" to overall suppressor length Direct thread to your barrel Universal HUB threads (1.375 ×...

2.25 total length takes 14.5 barrels to 16.1 for legal rifle barrel length requirements. All critical alignment features machined in one set up. Compatible with common .900-24 silencer mounts like...

The Dead Air Xeno 3-Prong Micro Flash Hider is a lightweight, high-performance muzzle device for 5.56 NATO/.223 REM rifles designed to minimize muzzle flash while offering robust suppressor mounting...

The B&T BT-ASSAULT-3P is a stainless steel muzzle device designed for 1/2x28 threaded barrels and finished in DLC for enhanced corrosion and wear resistance. With an overall length of 2.65 inches, it...

The Breek-LOK 3QD QD Suppressor Attachment system sets the standard for quick-detachmounts, delivering unmatched speed and simplicity. Its streamlined profile integrates seamlessly with firearms,...

All critical alignment features machined in one set up. Compatible with common .900-24 silencer mounts like the Q Plan-B and Rearden MFG Atlas. .30 caliber bore. 13/16 rear hex for easy installation...

The LANTAC LAM556FH-PBL Lamprey Plan-B Hub Mount Flash Hider offers improved signature reduction with a unique 'toothed' four tine design that disrupts gas more efficiently to reduce flash intensity...

The Breek-LOK 3QD Sentinel Caged Flash Hider mitigates muzzle flash by dispersing and redirecting gases, reinforced by internal threads that outperform standard flash hiders. This reduction in flash...

The Breek Arms Sentinel Caged Flash Hider features a caged design that redirects gases efficiently to reduce visible flash and preserve a clear sight picture especially in low-light conditions. Its...

Faxon MuzzLok Plan B Stainless Steel Flash Hider 1/2x28 with .250" bore diameter provides reliable flash reduction, precise fit, and is compatible with HUB-mount suppressor workflows. Made from 17-4...

The Dead Air Xeno 3-Prong Micro Flash Hider is a short, lightweight suppressor mounting option with non-negotiable repeatability and a solid return to zero—ideal for precision-minded shooters. It...

The Dead Air DA311 KeyMo flash hider is a rugged muzzle device engineered for .22 caliber rifles that demand reliable suppressor compatibility and proven flash management. Built from 4140 HT alloy...

The Samson Flash Hider for the Ruger 10/22 is one of the most useful 10/22 accessories available. It helps keep your night vision from being disabled in low-light situations and minimizes muzzle...

The Yankee Hill 4315M13LA Mini QD Flash Hider for 5.56x45mm NATO AR-platform features a compact 2.13" overall length, black phosphate finish, M13.5x1 left-hand threads, and is designed for fast...

The Luth-AR 5.5" Flash Hider is a robust and reliable accessory designed to enhance your firearm's performance. Made from high-quality 4150 steel with a manganese phosphate finish, this flash hider...

The GrovTec G-Nite Flash Suppressor is designed for .223 caliber AR-platform barrels to cool muzzle gases and reduce the flash signature during low-light shooting. It is constructed from solid steel...

The Dead Air KeyMicro Brake Flash Hider DA120 is a compact, lightweight flash hider designed for 5/8-24 threaded barrels and a 9mm bore. It uses the KeyMicro interface to integrate with Dead Air...

The KeyMicro Flash Hider is a short, lightweight flash hider suited for a variety of platforms. Designed for use with the KeyMicro Adapter, it functions as a minimalist flash hider on its own. Built...

The Dead Air KeyMicro Flash Hider is a lightweight, compact solution for 9mm platforms, designed to minimize muzzle flash while offering versatile suppressor mounting. It weighs just 3.36 ounces and...

The Dead Air DA116 KeyMicro Flash Hider is a lightweight, short flash hider designed for pistol-caliber firearms. Made from durable 4140 HT Alloy Steel with a black nitride finish, it features...

The Dead Air DA304 KeyMo Flash Hider is a 30 Caliber muzzle device built for KeyMo-equipped suppressor setups. It uses mass-shifted equal-length tines to reduce the ping associated with traditional...

The SureFire WARCOMP SPORT incorporates the essential features of the world's most shoot-able flash hider, the SureFire WARCOMP, designed specifically for use on an unsuppressed rifle or carbine. It...

This Dual Port Flash Hider is compatible with your AK-Platform with 14x1 LH threads.

The Flash Hider-QD 556 is designed to mitigate flash when unsuppressed. Muzzle device length is 2.3 inches, length added to the barrel is 1.7 inches (on barrels with 0.6" threads). Compatible with...

The Huxwrx 1912 Flash Hider-QD 5.56 offers quick detach convenience, titanium durability, and compatibility with multiple suppressors. It effectively reduces muzzle flash when unsuppressed and adds...

Huxwrx 1858 Flash Hider-QD 7.62mm Fits M26x1.5 LH Black. Muzzle device length is 2.3 inches, length added to barrel is 1.7 inches. Caliber/Gauge 7.62MM. Color Black.

The Samson Flash Hider for the Ruger 10/22 is designed to minimize muzzle flash and protect night vision in low-light shooting conditions. It easily slips onto a standard Ruger 10/22 barrel and...

The FH556RC-1/2-28 flash hider for 5.56 mm weapon platforms is the exact flash hider that SureFire developed to dominate the most rigorous suppressor trial in military history and earn the USSOCOM...

This Clutch-Lok QD mount doubles as a flash hider for SIG Sauer's 5.56MM SLH/SLX suppressors. It offers a quick and simple attachment of suppressors and reduced muzzle flash when the suppressor is...

The 5.56 NATO caliber Accu-Tac Flash Hider by Wilson Combat is the ideal choice for reducing muzzle flash. Its three-pronged external accurizing flutes provide improved muzzle harmonics, allowing you...

Wilson Combat Accu-Tac AR flash hider features a three-pronged external profile and exclusive external accurizing flutes that improve muzzle harmonics over other blast dispersing brakes. It is made...

The Strike Industries VENOMFH308 Venom Flash Hider nearly eliminates 100% of muzzle flash and quickly disperses burning gases exploding from the barrel. It significantly reduces muzzle flash to...

The SI VENOM FH nearly eliminates 100% of your muzzle flash and quickly disperses the burning gases exploding from the barrel. This flash hider significantly reduces muzzle flash to help preserve...

The Rugged Suppressors FH014 R3 Flash Mitigation System features variable fluted prongs to provide zero ring flash reduction and world-class flash suppression in a compact and lightweight design. It...

The Rugged FH010 R3 Flash Mitigation System features variable fluted prongs for zero ring and world-class flash reduction in a light, compact size. It utilizes the snag-free, toothless Dual Taper...

The TacFire MZ10053BN 6-Prong Flash Hider is a high-performance muzzle device designed for .308 Win AR-10 rifles. Featuring durable steel construction with a heat-treated, erosion-resistant black...

The Rugged Suppressors FH008 R3 Flash Mitigation System is a flash hider featuring variable fluted prongs designed to eliminate flash ring and provide world-class flash reduction. It has M15x1...

The A2X is an extended version of the A2 flash hider found on the M16 and M4 series of rifles. It is pre-drilled and comes with a dowel pin and crush washer for installation. Threaded 1/2"-28...