Hornady
Hornady 095333 Bullet Feeder Die for 44 S&W Spl 44 Mag
- SKU:
- 095333
- UPC:
- 090255953336
- MPN:
- 095333
Description
If you run a progressive press and hate the tedious hand‑setting of each handgun bullet, this die does the work for you. The case‑activated mechanism only releases a bullet when a case is present, so you never get a stray projectile jammed in the station. Solid‑steel collets stand up to the repeated stress of high‑volume reloading, promising years of dependable service. The feeder pairs with Hornady’s Lock‑N‑Load pistol bullet feeder (part 095320) or the dedicated Hornady bullet tubes. It threads into any press that offers a 7/8‑14 die thread and provides an open die station, making it a drop‑in upgrade for most progressive setups. By feeding both .44 Special and .44 Magnum jacketed bullets, it covers the two most popular .44 calibers without swapping tools. Because it’s a single‑die accessory, you’ll still need the feeder hardware and a compatible press, but once installed the die dramatically speeds up your reload cycle. Just load the feeder with the appropriate bullets, run the press, and watch each case pull a fresh projectile into place.
Key features
- Case‑activated feeding – The die only drops a bullet when a case is in the station, eliminating the need to hand‑set each projectile on a progressive press.
- Solid‑steel collet – Durable steel collet resists wear, ensuring reliable feeding for years of reloading.
- Fits Hornady Lock‑N‑Load system – Designed for the Lock‑N‑Load pistol bullet feeder (part 095320) and Hornady bullet tubes; works on any press with 7/8‑14 die threads and an open station.
- Supports .44 Special & .44 Magnum – Feeds both .44 Special and .44 Magnum handgun bullets, covering the two most common .44 calibers for pistols and revolvers.
- Progressive‑press ready – One‑die solution that replaces manual bullet placement, increasing cycle speed on compatible presses.
- Not for lead or plated bullets – The die is intended for jacketed bullets only; using lead or plated projectiles could cause feeding issues.
Specifications
| Brand | Hornady |
| Caliber / Gauge | .44 Special / .44 Magnum |
| Product name | 44 Special/Magnum Bullet Feeder Die |
| Model / MPN | 095333 |
| UPC | 090255953336 |
| Bullet caliber | .44 Special / .44 Magnum |
| Type | Case‑activated bullet feeder die |
| Collet material | Solid steel |
| Fits | Hornady Lock‑N‑Load pistol bullet feeder (095320) and Hornady bullet tubes |
| Press compatibility | Any progressive press with 7/8‑14 die threads and an open station |
What’s included
- 1 × Hornady 095333 Bullet Feeder Die
Good to know
- The die does not feed lead or plated bullets; use jacketed projectiles only.
- Requires a Lock‑N‑Load pistol bullet feeder or Hornady bullet tubes – sold separately.
- Works on any progressive press with 7/8‑14 die threads and an open die station.
Additional Information
Brand: |
Hornady |
Cartridge (SAAMI): |
44 S&W Special |
Material: |
Steel |
Model: |
Bullet Feeder |
Primary Application: |
All Purpose |
Series: |
Die |
GTIN / UPC: |
090255953336 |
Die Type: |
Bullet Feeder Die |
Packaging Type: |
EA |
Package Quantity: |
1 |