JK Armament
Jk Armament JKMDHDBE928 Bald Eagle Compensator Black Nitride Stainless Steel 1/2"x28 Threads 9mm
- SKU:
- JKMDHDBE928
- UPC:
- 850038425838
- MPN:
- JKMDHDBE928
- Width:
- 6.80 (in)
- Height:
- 1.30 (in)
- Depth:
- 8.30 (in)
Description
The Bald Eagle’s 1/2×28 direct thread mates straight onto a 9mm Luger barrel, eliminating the need for extra adapters. Its compact 1.65‑inch overall length means the device sits close to the muzzle, preserving the rifle’s handling while still venting gases to tame recoil. Front and rear wrench flats let you torque the compensator on or off with a simple socket, a boon for shooters who swap suppressors on the range.\n\nMachined from heat‑treated 17‑4 stainless steel and finished in black nitride, the compensator resists corrosion and wear, promising a long service life. The design also serves as an initial blast baffle inside a compatible JK Quick‑Attach suppressor, reducing flash and helping the suppressor last longer.\n\n
Key features
- Black Nitride Finish – Heat‑treated 17‑4 stainless steel is coated with a black nitride layer for corrosion resistance and a low‑profile look.
- 1/2×28 Direct Thread – Standard 1/2×28 thread matches most 9mm suppressor mounts, allowing a straight‑threaded installation without adapters.
- Wrench Flats Front & Rear – Flat surfaces on both ends let you install or remove the compensator with a standard wrench, speeding up field changes.
- Dual‑Duty Blast Baffle – Acts as an initial blast baffle inside a compatible suppressor, reducing flash and extending suppressor service life.
- Compact 1.65" OAL – Short overall length keeps the rifle’s balance forward while still delivering effective recoil mitigation.
- Heat‑Treated Stainless Steel – Machined from heat‑treated 17‑4 stainless steel for durability under repeated firing cycles.
Specifications
| Brand | JK Armament |
| Caliber / Gauge | 9mm Luger |
| Product name | Bald Eagle Compensator |
| Model / MPN | JKMDHDBE928 |
| UPC | 850038425838 |
| Material | Stainless Steel |
| Finish | Black Nitride |
| Cartridge (SAAMI) | 9mm Luger |
| Mount Type | Direct Thread |
| Thread Pattern | 1/2×28 |
| Overall Length (mm) | 52.0 mm |
| Weight | 28.35 gr |
| Series | Compensator |
| Muzzle Device Type | Compensator |
What’s included
- 1 × Bald Eagle Compensator (JKMDHDBE928)
Good to know
- Fits any 9mm Luger barrel with a 1/2×28 thread; verify your barrel’s thread pitch before purchase.
- The black nitride finish is durable but can be polished away if you later prefer a different aesthetic.
- Use a torque‑wrench to avoid over‑tightening the wrench flats; recommended torque is 10‑15 in‑lb.
Additional Information
Model: |
Bald Eagle |
Material: |
Stainless Steel |
Brand: |
JK Armament |
Cartridge (SAAMI): |
9mm Luger |
Mount Type: |
Direct Thread |
Muzzle Device Type: |
Compensator |
Overall Length: |
52.000 mm |
Product Weight: |
28.3500 gr |
Series: |
Compensator |
Threads: |
1/2x28 |
GTIN / UPC: |
850038425838 |
Color: |
Black |
Finish: |
Nitride |
Package Quantity: |
1 |
Packaging Type: |
EA |