RUGGED SUPPRESSOR
RUGGED SUPPRESSOR OP001 Suppressor Piston .578x28 Copper 17-4 Stainless Steel
- SKU:
- OP001
- UPC:
- 859383006112
- MPN:
- OP001
Description
When you mount a piston on a fixed‑barrel platform—carbine or sub‑gun—the gas that normally rushes past the suppressor can slam the muzzle device. Rugged’s OP001 piston solves that by using a non‑slotted, solid‑wall construction that seals the entire circumference of the bore, slashing gas blowback and keeping the action cleaner. The result is a smoother cycling experience and less fouling on your 9mm Luger system. Machined from 17‑4 stainless steel and heat‑treated for durability, the piston stands up to the heat and pressure of repeated firing. Its .578×28 direct‑thread interface mates perfectly with Rugged Suppressor’s proprietary mount, so you won’t need extra adapters or spacers—just screw it on and you’re ready to go. For fixed‑barrel setups you’ll want to replace the factory spring with a spacer, as the piston’s travel is tuned for that configuration. Weighing only 0.10 lb, the OP001 adds minimal mass to your suppressor, preserving the balance you expect from a lightweight setup. Whether you’re shooting tactical 9mm pistols or a carbine built on the same platform, this piston gives you a cleaner, more enjoyable shooting experience without sacrificing durability.
Key features
- Non‑slotted gas seal – The piston’s solid‑wall design eliminates slots, forming a 360° seal that reduces gas blowback for smoother cycling and less fouling.
- 17‑4 stainless steel construction – Machined from heat‑treated 17‑4 stainless steel, the piston resists corrosion and wear even under high‑round‑count use.
- .578×28 thread pattern – Direct‑thread .578×28 matches Rugged Suppressor’s proprietary mount, ensuring a secure, repeatable fit on compatible firearms.
- Designed for 9mm Luger platforms – Warehouse specs list 9mm Luger as the intended cartridge, making it ideal for pistols, carbines, and sub‑guns chambered in this round.
- Mount type: Direct Thread – No additional adapters required; the piston screws straight onto the suppressor’s barrel thread.
- Weight 0.10 lb – Lightweight design keeps overall suppressor weight down, preserving balance and handling.
Specifications
| Brand | RUGGED SUPPRESSOR |
| Caliber / Gauge | 9mm Luger |
| Product name | RUGGED SUPPRESSOR OP001 Suppressor Piston |
| Model / MPN | OP001 |
| UPC | 859383006112 |
| Material | 17-4 Stainless Steel |
| Finish | Stainless |
| Thread pattern | .578x28 |
| Mount type | Direct Thread |
| Cartridge (SAAMI) | 9mm Luger |
| Weight | 0.10 lb |
What’s included
- 1 × RUGGED SUPPRESSOR OP001 Suppressor Piston
Good to know
- Designed for use with Rugged Suppressor’s direct‑thread mounts; verify your suppressor model uses .578×28 threads before purchase.
- When installing on a fixed‑barrel platform, replace the factory spring with a fixed‑barrel spacer as recommended by the manufacturer.
- No additional tools are required for installation beyond a standard suppressor wrench.
Additional Information
Brand: |
Rugged Suppressor |
Cartridge (SAAMI): |
9mm Luger |
Material: |
Stainless Steel |
Model: |
Suppressor Piston |
Mount Type: |
Direct Thread |
Muzzle Device Type: |
Suppressor Adapter/Mount |
Threads: |
.578x28 |
GTIN / UPC: |
859383006112 |
Color: |
Silver |
Finish: |
Stainless |
Package Quantity: |
1 |
Packaging Type: |
EA |