Strike
Strike Industries ARFAGC AR Forward Assist Gold Anodized Steel Fits AR-15/M16
- SKU:
- ARFAGC
- UPC:
- 700598351408
- MPN:
- ARFAGC
Description
The forward‑assist assembly slots into the AR‑15/M16 lower receiver and gives you that extra push when the bolt refuses to close. Strike Industries machined the pawl and housing from high‑strength carbon steel, then heat‑treated the piece to keep the internals reliable even after heavy use. The gold‑anodized finish not only looks sharp but also adds a layer of corrosion resistance, which is handy for shooters who take their rifles into the field. All the bits you need come packaged together – the spring that powers the assist and a roll pin to lock everything in place. No extra ordering or guessing required; just drop the assembly in, secure the roll pin, and you’re ready to give the bolt that extra nudge when the rifle’s cycling a bit sluggish. The mil‑spec dimensions (5.8 in L × 4.3 in W × 0.8 in H) keep the profile tight, and at just 0.055 lb it won’t upset the rifle’s balance. Because it’s a direct‑replace part, you can swap it in on the bench without any special tools beyond a roll‑pin driver. Whether you’re upgrading a worn assist or building a new build, this forward‑assist gives you a reliable, low‑profile solution that matches the AR‑15’s rugged reputation.
Key features
- Gold‑Anodized Steel – The anodized finish resists corrosion while the gold coating adds a distinctive look without sacrificing strength.
- Mil‑Spec Size – Designed to fit standard AR‑15/M16 lower receivers, so it drops straight into the existing forward‑assist pocket.
- Includes Spring & Roll Pin – All necessary hardware ships with the part, eliminating the need to hunt for compatible springs or pins.
- Heat‑Treated Carbon Steel – Heat treatment ensures the pawl and internal components maintain proper function under repeated use.
- Compact Dimensions – At 5.8 in L × 4.3 in W × 0.8 in H, it fits snugly within the receiver without adding bulk.
- Lightweight Build – Weighing only 0.055 lb (≈56 gr), it adds minimal mass to the rifle, preserving balance.
Specifications
| Brand | Strike Industries |
| Product name | AR Forward Assist Gold Anodized Steel |
| Model / MPN | ARFAGC |
| UPC | 700598351408 |
| Series | Forward Assist |
| Finish | Anodized (Gold) |
| Material | Steel |
| Length | 5.8 in |
| Width | 4.3 in |
| Height | 0.8 in |
| Weight | 0.055 lb |
| Cartridge (SAAMI) | .223 Remington |
| Firearm Platform | AR‑15, M16/M4 |
| Includes | Spring, Roll Pin |
What’s included
- 1 × Strike Industries AR Forward Assist Gold Anodized Steel Assembly
- Spring
- Roll Pin
- Owner’s Manual (PDF)
Good to know
- Fits any standard AR‑15/M16 lower receiver that uses a mil‑spec forward‑assist pocket.
- The gold anodized finish is cosmetic; the underlying steel is the load‑bearing component.
- Replace the forward‑assist only if the existing part is worn or broken – it’s not required for normal operation.
- Secure the roll pin with a proper roll‑pin driver to avoid over‑compressing the pin.
Additional Information
Brand: |
Strike |
Cartridge (SAAMI): |
223 Remington |
Firearm Platform: |
AR-15, M16/M4 |
Material: |
Steel |
Model: |
AR |
Product Weight: |
56.0000 gr |
Series: |
Forward Assist |
GTIN / UPC: |
700598351408 |
Finish: |
Anodized |
Package Quantity: |
1 |
Packaging Type: |
BOX |