AREA 419 FIREARMS
AREA 419 419-HUNT-3434 HUNT 34DIA 34HI
- SKU:
- 419-HUNT-3434
- UPC:
- 810080183018
- MPN:
- 419-HUNT-3434
Description
These HUNT rings are built around a 34 mm tube diameter and a 24 mm mount height – the sweet spot for most modern scopes that need a low‑profile mount on a Picatinny rail. The rings are machined from 7075 aerospace‑grade billet aluminum, then anodized with a Type 3 hardcoat on the outside while the bore stays raw aluminum for a true‑bore fit that won’t slip under recoil.
Assembly isn’t left to chance. After anodizing, the bases and caps are re‑assembled, torqued to 45 in‑lb on the cap and 18 in‑lb on the ring, and finally bore‑matched as a set in high‑precision CNC centers. The result is a pair of rings that stay true shot after shot, even in a dramatic recoiling environment.
Because the design omits any accessory attachment points, the rings stay as light as possible – just 4 oz per set for the 30 mm medium version. If you need extra rails for accessories, Area 419’s MATCH or TACTICAL offerings cover that, but the HUNT rings focus on pure rigidity and a clean, low‑profile mount.
Key features
- 34 mm × 24 mm footprint – Matches a standard 34 mm scope tube while keeping the ring height low for a slim profile on Picatinny rails.
- 7075 aerospace‑grade aluminum – Provides high strength‑to‑weight ratio; the rings stay rigid even under heavy recoil.
- Type 3 hardcoat anodize finish – Corrosion‑resistant exterior while the internal bore remains raw aluminum for a true‑bore fit.
- Stainless‑steel hardware – All screws and caps are stainless, preventing rust and maintaining torque over time.
- Weight 4 oz per set (30 mm medium) – Very light – a full set adds barely any weight to your rifle, preserving balance.
- Pre‑torqued to spec – Each cap is torqued on a 45 in‑lb limiter (cap) and 18 in‑lb limiter (ring) for repeatable installation.
Specifications
| Brand | Area 419 |
| Optic Ready | No |
| Threaded Barrel | No |
| Product name | HUNT Scope Rings |
| Model / MPN | 419-HUNT-3434 |
| UPC | 810080183018 |
| Tube diameter | 34 mm |
| Mount height | 24 mm |
| Weight (per set) | 4 oz |
| Package dimensions | 5 × 4 × 2 in |
| Material | 7075 aerospace‑grade billet aluminum |
| Coating | Type 3 hardcoat anodize (external) – raw aluminum bore |
| Hardware material | Stainless steel |
| Torque spec (cap) | 45 in‑lb |
| Torque spec (ring) | 18 in‑lb |
| Required tool | T20 Torx bit |
What’s included
- 1 × HUNT ring set (base + cap) for 34 mm tube, 24 mm height
- Stainless‑steel T20 Torx screw
- Installation torque limiter (45 in‑lb)
- Installation torque limiter (18 in‑lb)
- Owner’s installation guide
Good to know
- These rings are sold as a matched set; never mix bases and caps from different sets.
- No accessory attachment points – if you need rails for lights or lasers, consider Area 419’s MATCH or TACTICAL rings.
- The internal bore is raw aluminum; avoid over‑tightening to prevent galling – use the supplied torque limiters.
Additional Information
Brand: |
Area 419 Firearms |
Material: |
Aluminum |
Model: |
HUNT 34DIA 34HI |
Mount Height: |
1.5 in |
Tube Diameter: |
34 mm |
GTIN / UPC: |
810080183018 |
Rail / Attachment Type: |
Picatinny (MIL-STD-1913) |
Mount Type: |
Picatinny Mount |
Finish: |
Cerakote |
Package Quantity: |
1 |
Packaging Type: |
EA |