Lee

Lee Precision 90623 Carbide 3-Die Set 38 ACP / 38 Super

(No reviews yet) Write a Review
SKU:
P-0F20E88A0DCE304E4
UPC:
734307906238
MPN:
90623
$32.02

Description

When you’re pulling .38 ACP or .38 Super brass on a bench press, the first thing you need is a die that won’t round off after a few hundred pulls. Lee’s carbide full‑length sizing die holds its edge, keeping case head dimensions spot‑on so your rounds stay consistent downrange. The powder‑thru expanding die follows right after, opening the case mouth while letting the powder flow straight through—no extra funnel, no extra time. The universal shell holder is sized for both .38 ACP and .38 Super, meaning you can keep a single set on the bench and switch calibers on the fly. A dedicated powder dipper slots into the die block, feeding powder directly into the expanding die, which cuts down on spillage and speeds up the reload cycle. All of this is backed by Lee’s load data sheet, giving you safe pressure numbers and charge weights right out of the box. Carbide‑treated surfaces mean the dies resist the wear that softer steel would show after a few hundred cases, so you get a longer‑lasting tool that stays true even under high‑volume shooting sessions. Whether you’re polishing target plinking or prepping for a competition, this set gives you the consistency and durability you need without extra accessories.

Key features

  • Carbide full‑length sizing die – The carbide material resists wear, keeping case dimensions tight run‑to‑run for better accuracy and brass longevity.
  • Powder‑thru expanding die – Expands the case mouth while allowing powder to flow through, speeding up the loading cycle without sacrificing uniformity.
  • Universal shell holder – Accommodates both .38 ACP and .38 Super brass, so you can switch calibers without swapping components.
  • Included powder dipper – Feeds powder directly into the die, eliminating the need for a separate powder funnel and reducing mess.
  • Load data & instructions – Factory‑provided load tables and step‑by‑step guide get you shooting faster and help you stay within safe pressure limits.
  • Carbide construction – Hard‑facing on the dies extends service life, especially useful when working high‑volume brass.

Specifications

BrandLee
Caliber / Gauge38 Super
Product name38 ACP/.38 Super Carbide 3‑Die Set
Model / MPN90623
UPC734307906238
Cartridge (SAAMI)38 Super
Die Type3‑Die Set
Primary ApplicationTarget Plinking
Packaging TypeEA
Package Quantity1

What’s included

  • 1 × Carbide Full‑Length Sizing Die
  • 1 × Powder‑Thru Expanding Die
  • 1 × Universal Shell Holder
  • 1 × Powder Dipper
  • 1 × Instructions / Load Data Sheet

Good to know

  • The set works with both .38 ACP and .38 Super brass; ensure you select the correct case length when sizing.
  • Carbide dies are harder than standard steel dies, but they can be more brittle—handle with care and avoid dropping the die block.
  • Load data provided is specific to the .38 Super cartridge; verify pressure limits if you experiment with different powders or bullet weights.
View AllClose

Additional Information

Brand:
Lee
Cartridge (SAAMI):
38 Super
Model:
Carbide
Packaging Type:
EA
Primary Application:
Target Plinking
Series:
3-Die Set
GTIN / UPC:
734307906238
Die Type:
3-Die Set
Package Quantity:
1
View AllClose

0 Reviews

View AllClose