Description
If you’ve wrestled with a case mouth that either over‑crimps or leaves too much slack, the culprit is often the die’s angle. Lee’s Taper Crimp Die for .44 Special and .44 Magnum reshapes that angle, delivering a smooth, consistent taper that feeds cleanly in most semi‑auto pistols. The design is a direct evolution of Lee’s 1986 die line, where the crimp was already tweaked, so you’ll see the same performance whether you pair it with older or newer die sets. The die is a single‑piece component that slots into the standard Lee pistol die block. No extra hardware or adapters are needed—just drop it in, align the cartridge, and crank the press. Because it’s sold alone, you can swap out a worn die without repurchasing the whole crimp set, keeping your reloading budget tight. Built to Lee’s quality standards, this die pairs perfectly with the .44 Special and .44 Magnum cartridges that dominate many pistol platforms. Whether you’re loading for target practice or a defensive carry, the consistent crimp helps maintain reliable chambering and extraction, letting you focus on accuracy rather than troubleshooting feed issues.
Key features
- Modified taper crimp angle – The die’s geometry eliminates the common crimp‑over‑tightening seen with legacy dies, giving consistent case mouth tension for reliable feeding.
- Dedicated to .44 Special / .44 Magnum – Optimized for the .44 family, it works straight out of the box with Lee’s 44‑series reloading kits.
- One‑die set – Packaged alone, so you can replace a worn die without buying a full kit.
- Lee Precision brand – Backed by Lee’s long‑standing reloading expertise and compatibility with their other die components.
- Standard pistol die size – Fits any Lee pistol‑type die block or comparable reloading press that accepts 44‑series dies.
- Easy to install – Threaded onto the die block with the same pitch as other Lee pistol dies, requiring no special tools.
Specifications
| Brand | Lee Precision |
| Caliber / Gauge | 44 Special / 44 Magnum |
| Product name | Lee Precision Taper Crimp Die 44 Special / 44 Magnum |
| Model / MPN | 90784 |
| UPC | 734307907846 |
| Type | Taper Crimp Pistol Die |
| In Set | 1 |
| Series | Crimp Die |
| Die Series | Crimp |
What’s included
- 1 × Lee Precision Taper Crimp Die 44 Special / 44 Magnum (MPN 90784)
Good to know
- Fits Lee 44‑series die blocks and compatible reloading presses; replace only the crimp die, not the entire set.
- Designed for pistol‑type cartridges; do not use with rifle‑size dies.
Additional Information
Brand: |
Lee |
Cartridge (SAAMI): |
44 Remington Magnum |
Model: |
Taper |
Series: |
Crimp |
GTIN / UPC: |
734307907846 |
Die Type: |
Crimp Die |
Packaging Type: |
EA |
Package Quantity: |
1 |