Lee
Lee Precision 90843 Factory Crimp Die 30-40 Krag
- SKU:
- 90843
- UPC:
- 734307908430
- MPN:
- 90843
- Width:
- 4.60 (in)
- Height:
- 1.40 (in)
- Depth:
- 3.30 (in)
Description
When you’re loading .30‑40 Krag for big‑game hunting, neck tension matters. This Lee factory crimp die pulls the case neck to spec and then crimps the bullet in the same stroke, giving you that tight, factory‑like hold without a separate crimping step. The steel body handles the high pressures of the cartridge and will keep its geometry even after countless reloads. Because the die is calibrated specifically for .30‑40 Krag, you get repeatable neck dimensions that translate to tighter groups downrange. Install it in a full‑length die set, run a single pass, and the bullet is seated securely—perfect for those long‑range shots where every inch counts. Lee’s reputation for durable reloading tools backs this die, and the “Made in USA” label assures you of consistent quality control. Packaged one‑per‑each, it’s ready to slot into your existing setup and start crimping right away.
Key features
- Factory‑crimp design – Resizes the case neck while simultaneously applying a strong crimp, ensuring the bullet stays seated even without a dedicated crimp groove.
- Steel construction – Durable steel body stands up to repeated use and high‑pressure loads without deformation.
- 30‑40 Krag specific – Optimized chamber dimensions for the .30‑40 Krag cartridge, delivering consistent neck tension for accurate shooting.
- Single‑pass operation – One‑stroke sizing and crimping speeds up reload cycles and reduces tool changes on the bench.
- Made in USA – Manufactured domestically, meeting Lee’s quality standards for reloading components.
- Packaging: EA – Each die ships individually, ready for immediate installation in a full‑length die set.
Specifications
| Brand | Lee |
| Caliber / Gauge | 30-40 Krag |
| Product name | Factory Crimp Die .30-40 Krag |
| Model / MPN | 90843 |
| UPC | 734307908430 |
| Die Type | Sizing |
| Material | Steel |
| Model | Factory |
| Series | Crimp |
| Primary Application | Hunting Big Game |
| Packaging Type | EA |
| Package Quantity | 1 |
What’s included
- 1 × Lee Factory Crimp Die .30-40 Krag
Good to know
- The die is intended for use with a full‑length die set; it does not include a die holder or press.
- Designed for .30‑40 Krag only; using it on other calibers may result in improper neck tension.
Additional Information
Brand: |
Lee |
Cartridge (SAAMI): |
30-40 Krag |
Die Type: |
Sizing |
Material: |
Steel |
Model: |
Factory |
Packaging Type: |
EA |
Primary Application: |
Hunting Big Game |
Series: |
Crimp |
GTIN / UPC: |
734307908430 |
Package Quantity: |
1 |