Lee
Lee Precision 90954 Collet Die Only 223 Rem
- SKU:
- 90954
- UPC:
- 734307909543
- MPN:
- 90954
- Width:
- 4.50 (in)
- Height:
- 2.10 (in)
- Depth:
- 3.80 (in)
Description
When you’re pulling cases that have only seen your own barrel, the collet die gives you a clean, repeatable neck squeeze. The steel collet clamps the case neck against a precision mandrel, aligning the brass without any oil—perfect for shooters who want the purest possible neck dimensions.
Because the die works only on the neck, you avoid over‑working the body of the case. That means the brass stays strong longer, and you’ll see tighter groups out of the range. It’s a simple swap into any standard die block, and the .223 Remington (or Ackley‑Improved) chamber fit is already accounted for.
Key features
- Steel collet construction – The hardened steel collet grips the case neck uniformly, delivering consistent neck dimensions without the variability of traditional dies.
- No case lubrication required – Because the collet compresses the neck directly, you skip the messy lube step, keeping the brass cleaner and the reloading process faster.
- Precision mandrel alignment – A machined mandrel ensures the neck is centered, which translates to reduced run‑out and tighter shot‑to‑shot accuracy.
- Designed for .223 Rem/ Ackley Improved – Fits both standard .223 Remington and Ackley‑Improved chambers, making it a versatile addition to any .223 reloading setup.
- Single‑die package – Comes as a lone die (1 × die) ready to slot into your existing die set; no extra components needed.
- Extended case life – Gentle neck sizing preserves brass integrity, allowing more reloads per case before the neck thins out.
Specifications
| Brand | Lee |
| Caliber / Gauge | .223 Remington |
| Product name | Collet Neck Sizing Die |
| Model / MPN | 90954 |
| UPC | 734307909543 |
| Die type | Neck Sizer |
| Series | Neck Die Only |
| Material (collet) | Steel |
| In set | 1 |
| Type | Collet Neck Sizing Rifle Die |
What’s included
- 1 × Lee Precision Collet Neck Sizing Die (MPN 90954)
Good to know
- Only sizes the case neck; you’ll still need a full‑length sizing die for body work.
- The die requires a compatible mandrel sold separately if you want to decap the flash hole.
- Works best with brass that has been fired through the same rifle you’ll be reloading for the most consistent results.
Additional Information
Brand: |
Lee |
Cartridge (SAAMI): |
223 Remington |
Die Type: |
Neck Sizing |
Material: |
Steel |
Model: |
Collet |
Primary Application: |
Target Match |
Series: |
Collet |
GTIN / UPC: |
734307909543 |
Finish: |
Silver |
Packaging Type: |
EA |
Package Quantity: |
1 |