RCBS
RCBS 9218 Single Stage Shell Holder #18 .44 Mag/ .44 Spec
- SKU:
- 9218
- UPC:
- 076683092182
- MPN:
- 9218
- Width:
- 2.00 (in)
- Height:
- 0.50 (in)
- Depth:
- 5.80 (in)
Description
When you’re pulling a lot of .44 Special or .44 Remington Magnum brass, keeping the case head perfectly aligned with the die is key to repeatable results. This RCBS shellholder clamps the case over a 0.125‑inch section, holding it square to the die throughout the resizing and priming steps. Its hardened‑steel body takes the abuse of daily reloading without losing its tolerances, so you can trust the same fit run after run. The removable design means you can snap it onto a single‑stage or turret press in seconds, then pull it off when you switch to a different caliber. No tools, no fuss—just a solid, repeatable grip on the case head that lets you focus on the charge and bullet rather than worrying about mis‑feeds or inconsistent headspacing.
Key features
- Hardened‑steel construction – The steel body resists wear and maintains precise dimensions, so the holder stays true even after heavy use on the bench.
- Removable design – Easily snap on or off the press, allowing quick changes between different calibers without tools.
- Fits .44 Special / .44 Rem Mag – Specifically machined to match the case head dimensions of both .44 Special and .44 Remington Magnum, ensuring proper alignment.
- Single‑stage & turret compatible – Designed to work with both single‑stage and turret reloading presses, providing a versatile tool for any bench setup.
- Captures 0.125" of case head – The holder grips the case head over a 0.125‑inch length, keeping the case square to the die for consistent headspacing.
- Compact footprint – Small enough to fit in tight press setups while still providing a solid grip on the case.
Specifications
| Brand | RCBS |
| Caliber / Gauge | 44 Special / .44 Remington Magnum |
| Product name | Shellholder #18 (44 Special / .44 Remington Magnum) |
| Model / MPN | 9218 |
| UPC | 076683092182 |
| Material | Hardened steel |
| Fit | .44 Special, .44 Remington Magnum |
| Capture length | 0.125 in |
| Intended press type | Single‑stage, turret |
| Removable | Yes |
What’s included
- 1 × RCBS Shellholder #18
Good to know
- Designed for use with standard single‑stage and turret reloading presses; ensure the press’s shell holder slot matches the removable style.
- Check that the case head dimensions of your brass fall within the holder’s specifications for optimal alignment.
- Clean the holder with a light oil after use to prevent rust and maintain smooth operation.
Additional Information
Material: |
Steel |
Brand: |
RCBS |
Cartridge (SAAMI): |
44 S&W Special |
Model: |
Single Stage |
Package Quantity: |
1 |
Series: |
Shell Holder |
GTIN / UPC: |
076683092182 |
Packaging Type: |
EA |
Shell Holder Number: |
#18 |