RCBS

RCBS 99235 Single Stage Shell Holder #35 for 38-40/ 44-40 Win/ 45 Schofield

(No reviews yet) Write a Review
SKU:
P-9C2B772A0309817E8
UPC:
076683992352
MPN:
99235
Width:
2.00 (in)
Height:
0.50 (in)
Depth:
5.90 (in)
MSRP: $10.29
$9.23
— You save $1.06

Description

When you’re pulling cases on a single‑stage or turret press, the little things matter. This RCBS #35 shell holder grabs the case head by a precise 0.125 in, keeping it square to the die and guaranteeing SAAMI‑approved headspacing every time. The hardened‑steel body with a smooth silver finish resists wear, so you won’t be swapping it out after a few loads.

Because it’s cut to #35 dimensions, it slides right into the chamber of .38‑40, .44‑40 Winchester and .45 Schofield cartridges. No fiddling with adapters or makeshift solutions—just drop the holder in, load your cases, and the press does the rest. At only four ounces, it adds negligible weight to your bench while delivering rock‑solid durability for countless reloads.

Key features

  • Silver steel construction – The holder is machined from hardened steel with a polished silver finish, standing up to the repeated pressure of reloading cycles.
  • #35 size fit – Specifically sized for .38‑40, .44‑40 Win and .45 Schofield case heads, eliminating the guesswork of generic holders.
  • 0.125‑in case‑head capture – Designed to hold the case head by a quarter‑inch, providing consistent alignment with the die for accurate headspacing.
  • Single‑stage & turret ready – Fits both single‑stage and turret reloading presses, so you can swap it in without modifying your setup.
  • Lightweight – 4 oz – Weighs only four ounces, keeping your reloading bench tidy while still delivering the durability you need.
  • One‑piece steel design – No moving parts or springs to fail; the solid construction ensures long‑term reliability.

Specifications

BrandRCBS
Product nameRCBS Single Stage Shell Holder #35
Model / MPN99235
UPC076683992352
Size#35
FinishSilver
MaterialSteel
Weight4 oz
Quantity1
Compatible calibers.38‑40 Win, .44‑40 Win, .45 Schofield
Case‑head capture0.125 in
Intended press typeSingle‑stage, Turret

What’s included

  • 1 × RCBS Single Stage Shell Holder #35

Good to know

  • Designed for use with single‑stage and turret reloading presses only; not compatible with automatic or rotary presses.
  • Ensure the holder is seated fully in the press to achieve the advertised 0.125 in case‑head capture.
View AllClose

Additional Information

Material:
Steel
Brand:
RCBS
Cartridge (SAAMI):
45 Schofield
Model:
Single Stage
Package Quantity:
1
Series:
Shell Holder
GTIN / UPC:
076683992352
Packaging Type:
EA
Shell Holder Number:
#35
View AllClose

0 Reviews

View AllClose