RCBS
RCBS 9290 Summit Reloading Press Cast Iron/Steel
- SKU:
- P-9E021502429D3828A
- UPC:
- 076683092908
- MPN:
- 9290
- Width:
- 6.75 (in)
- Height:
- 5.75 (in)
- Depth:
- 15.25 (in)
Description
The Summit press sits on your bench with the case locked in place; the die drops straight down, giving you a clean, repeatable crush every time. Its all‑steel linkage means the force you apply goes straight to the die—no flex, no wasted energy. The massive cast‑iron frame absorbs the hammer’s impact, keeping the whole setup rock‑steady even when you’re loading dozens of rounds per minute.
Because the layout is ambidextrous, you can reach the case from either side without awkward twisting. That’s a real time‑saver when you’re switching between calibers or loading a high‑capacity magazine. The press also takes standard 1‑inch die‑body bushings, so you can drop in the right die for any cartridge you’re working on without hunting for specialty adapters.
Key features
- All‑steel linkage – The solid steel linkage transfers force directly to the die, eliminating flex and giving consistent crush on every pull.
- Cast‑iron frame – Heavy‑duty cast iron anchors the press to the bench, providing a rock‑solid platform that resists vibration.
- Ambidextrous design – Both left‑ and right‑handed shooters can access the case without repositioning, speeding up high‑volume reloads.
- 1‑inch die‑body compatibility – Accepts standard 1‑inch bushings, so you can swap dies for different calibers without extra adapters.
- Bench‑top operation – The case stays stationary while the die descends, simplifying alignment and reducing the chance of misfeeds.
- Durable construction – Cast iron and steel components stand up to the repeated hammer blows of heavy reloading sessions.
Specifications
| Brand | RCBS |
| Product name | Summit Single-Stage Reloading Press |
| Model / MPN | 09290 |
| UPC | 076683092908 |
| Material | Cast Iron frame with all‑steel linkage |
| Design | Ambidextrous bench‑top single‑stage press |
| Die compatibility | Accepts 1‑inch die‑body bushings |
| Operation | Case remains stationary; die descends onto case |
What’s included
- 1 × RCBS Summit Single-Stage Reloading Press
- Owner’s manual (paper)
Good to know
- The press is designed for bench use only; it does not include a built‑in case holder.
- Standard 1‑inch die bushings are required for operation—these are sold separately if not already in your kit.
- Cast‑iron frame adds weight; ensure your bench can support the unit’s mass.
Additional Information
Brand: |
RCBS |
Material: |
Steel |
Model: |
Summit |
Primary Application: |
Target Plinking |
Series: |
Reloading Press |
GTIN / UPC: |
076683092908 |
Finish: |
Steel |
Packaging Type: |
EA |
Package Quantity: |
1 |