Reloading Equipment

Grips the shell for a firm fit in the press during reloading or priming operations. Universal shell holder used in most brands of reloading presses. Not for use with the Auto-Prime.

Grips the shell for a firm fit in the press during reloading or priming operations. Universal shell holder used in most brands of reloading presses. Not for use with the Auto-Prime.

The stepped design allows you to easily grip a single case without jamming your fingers down into a group of cases like in traditional loading blocks, and allows for a smaller footprint on your bench...

RCBS' M500 mechanical scale provides right- or left-handed operation. Featuring a proven two-poise design that lets you weigh up to 505 grains with +/-0.1-grain accuracy, the M500 also offers RCBS'...

The Lock-N-Load Rifle Bullet Feeder is designed for the Lock-N-Load AP reloading press and compatible with other presses using 7/8"-14 die threads. It feeds 22 caliber rifle bullets efficiently,...

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case...

The Hornady Mandrel 391913 is a precision mandrel designed for use with the Hornady Neck Turn Tool to support and properly align 6mm cartridge cases during neck turning, ensuring consistent neck...

Lyman 7777790 Large Primer Pocket Cleaner Multi-Caliber cleans fouling from primer pocket bottoms to improve accuracy and safety. Molded handle included. Available in large or small sizes. Compatible...

Lyman's specially formulated case cleaning solution delivers superior case cleaning of case and primer pockets. The ultrasonic cavitation lifts and dissolves carbon, dirt and any residue left on...

The Hornady Lock-N-Load Hot Tub Sonic Cleaner features a 9 liter capacity tank capable of cleaning 16 inch AR-15 uppers. It includes four transducers, heating element, de-gas function, and five...

The Lyman Turbo Sonic Power Professional Ultrasonic Case Cleaner features the largest and most powerful ultrasonic cleaning system with an extra-long heated stainless steel tank, ten industrial...

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case...

Hornady Lock N Load Auto Press Case Retainer spring. Quickly and easily remove and/or replace a case from the shell place at any point in the cycle. Case retainer spring fits all calibers. It's...

For use with the Hornady Cam Lock bullet puller. Clamps to the bullet so that it can be removed quickly and easily. Works like a draw collet on a lathe to secure cases for trimming to length.

The Hornady Lock-N-Load Overall Length Gauge is designed to increase the accuracy of your hand loads by precisely measuring your rifle’s freebore to quickly and easily determine the proper bullet...

Birchwood Casey Brass Cartridge Case Cleaner is a super concentrate 16 oz bottle that makes over two gallons of reusable cleaning solution. It cleans 8,000 medium sized brass cartridge cases by...

The Lee 90197 Universal Shell Holder Set includes 11 of the most popular shell holders compatible with more than 115 different cartridges. Made from hardened steel and designed to fit most...

The Frankford Arsenal Platinum Series Hand Deprimer is a sturdy die cast aluminum tool featuring a (patent pending) Universal Collet System that allows depriming of brass from .20 caliber up to .338...

These high-quality replacement parts are compatible with the RCBS Rock Chucker, Reloader Special and most C-frame single-stage presses.

This collet is designed be used with the RCBS Standard Bullet puller to remove bullets from a wide range of cases.

The RCBS Pow'r Pull Impact Bullet Puller features a solid one piece body, innovative 3-jaw chuck that firmly grips the case rim. Just tap it on a solid surface as you would a hammer, and the powder...

RCBS Case Trimmer Pilot is tapered to guide pilot into the case mouth. The design prevents a case from wobbling when being trimmed to length. NOTE: This item is for use with RCBS Trim Pro Case...

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case...

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case...

RCBS has improved upon even the basic plastic funnel. It features a specially designed drop tube to avoid any messy powder spills around case mouths, a non-stick, anti-static surface, and a square...

Our shell plates feature a subtle radius on each shell holder mouth to ensure smooth and reliable functioning. The retainer spring is designed to stay in place when inserting cases into the shell...

Size and lubricate cast bullets in one step with the Lube-A-Matic-2. Its fingertip regulator lets you fine-tune lubricant flow. The Lube-A-Matic-2 also seats gas checks. The Lube-A-Matic-2 Bullet...

RCBS 80008 Bullet Lubricant is a non-toxic, temperature resistant blend of Alox and beeswax, developed for pistol and low velocity rifle cast bullet reloading. It fits Lube-A-Matic Sizer/Lubricator...

The Compact Universal Loading Tray accommodates most traditional cases sold in the U.S.; however, it will not hold newer rounds such as the WSM, WSSM, Rem Ultra Mags and the 500 S&W Mag. Each side is...

Lee 338 Lapua Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud. Trim to length 2.706 to 2.726 inches.

Lee's Six Cavity Mold is made for heavy duty volume production. The mold blocks have steel bushing and alignment pins for lasting precision. Included is a cam operated sprue plate to eliminate the...

Lee's Double Cavity Ball Round Mold produces two balls in the specified size suitable for black powder firearms. These round ball molds have a tangential cut off which eliminates the objectional nib...

Lee 243 WSSM Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.650 to 1.670 inches.

Lee's Bench Plate allows for quick press removal without unbolting from the bench. It includes one steel base block that fits current Lee metallic presses. Special elevator bolt hardware is included...

Lee Loader is a complete reloading system, kit includes everything needed to reload 243 Win, except plastic or wood mallet. Please note: The Classic Lee Loader neck sizes only. This is not...

Grips the shell for a firm fit in the press during reloading or priming operations. Will fit the Auto Prime and Auto Prime II.

Lee 45/70 GOVERNMENT Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.085 to 2.105 inches.

Lee 338 WIN MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.480 to 2.500 inches.

Lee 30/30 WIN Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.019 to 2.039 inches.

Lee 257 ROBERTS, 257 Ackley Improved Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.213 to 2...

Use the Lee Cutter and Lock Stud with the Case Length Gauge & Shell Holder to trim cases. Can be used by hand or with an electric drill. Works on all brass less than .475 base diameter. If you are...

Lee's Lube & Size Kit allows you to lubricate and size cast bullets. It can also seat and crimp gas checks. Intended for use on single stage presses only, the sizer die has standard 7/8 x 14 threads...

Lee’s Lube & Size Kit allows you to lubricate and size cast bullets. It can also seat and crimp gas checks. Intended for use on single stage presses only, the sizer die has standard 7/8 x 14 threads...

Grips the shell for a firm fit in the press during reloading or priming operations. Universal shell holder used in most brands of reloading presses. Not for use with the Auto-Prime.

The Pocket-Touch 1500 offers full size performance in a very compact, portable design. The scale is just 2¼ x 4¼ x ¾ yet provides advanced touch screen controls and a full 1500 grain capacity. The...

RCBS Case Trimmer Pilot is tapered to guide pilot into the case mouth. The design prevents a case from wobbling when being trimmed to length. NOTE: This item is for use with RCBS Trim Pro Case...

Hornady 391910 Mandrel Neck Turn Tool 22 Cal Stainless Steel Silver. This reloading features Brand: Hornady; Model: Mandrel; Material: Stainless Steel; Series: Neck Turn Tool.

Lyman's Turbo Charger Medcia restores previously used corncob media. Simply add as instructed directly to media.

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case...

Allows you to make precise adjustments of all standard 7/8"-14 dies and accessories. Clamps around the whole die and wont damage the threads. Applies constant pressure across the threads to hold the...

Hornady's Primer Case Reamer is an extra reamer head for Primer Pocket Reamer.

The Frankford Arsenal Quick-N-EZ Rotary Sifter is the ideal tool to quickly separate brass from media with a simple turn of a handle. Brass is caught in the separator while the media falls into a 3...

Lyman's Stainless Steel Dial Caliper is an affordable and handy reloading tool to give you accurate measurements. This precision tool will deliver unfailing .001" accuracy long after the best...

Hornady Lock-N-Load Cartridge Gauges allow the user to check their cases and ammo to ensure a correct fit in SAAMI chambers. Available in a variety of calibers.

Hornady Lock-N-Load Cartridge Gauges allow the user to check their cases and ammo to ensure a correct fit in SAAMI chambers.

The Hornady Handheld Priming Tool 0500021 is a multi-caliber, hand-operated primer seating tool designed for precise, fatigue-reducing loading of small and large primers. Featuring a pliers-style...

Wheeler's Hammer and Punch Set includes a nylon/brass hammer, eight precision brass punches, four steel punches, and two plastic punches. The hammer's nylon face is non-marring and great for...

Lyman's Case Prep Center Xpress is the only "All-Inclusive" System offering all the most popular case prep accessories driven by a high torque gear motor. All the accessories are included, so there...

Hornady Lock-N-Load Bullet tubes can fit 40 plus bullets depending on caliber and weight and feature a milled window for visual bullet level inspection. Lock-N-Load Bullet Tubes are sold in packs of...

The RCBS 9802 Expander Decapping Unit is designed for 5.56mm/.223 Rem cartridges. It includes an expander rod, expander ball, and decapping pin used with sizing dies to efficiently de-prime spent...

The RCBS Universal Primer Arm-2 is designed for fast, accurate primer seating. It includes primer plugs and sleeves for large and small rifle and pistol primers. Changing sizes is fast and easy,...

The Primer Tray 2 handles today's larger primer package quantities. The square shape makes it easier to handle and its grooved tray surface quickly positions primers anvil-side up.

RCBS Case Trimmer Pilot is tapered to guide pilot into the case mouth. The design prevents a case from wobbling when being trimmed to length. NOTE: This item is for use with RCBS Trim Pro Case...

RCBS 9307 Case Lube Pad lubricates cartridge cases for resizing and forming. It provides an even and consistent coating of lubricant essential for smooth sizing operations. The sponge pad is...

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case...

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case...

Hornady’s Lock-N-Load Shellholder Kit is a multi-caliber set designed for fast, consistent case seating and reliable press operation. Precision machined from steel and heat-treated, each shell holder...

The Lock-N-Load Sonic Cleaner 2 Liter features an 80 watt ceramic heater that enhances cleaning action and especially helps when cleaning gun parts. Its large two liter stainless steel tank holds up...

The Frankford Arsenal Perfect Seat Hand Primer ensures you do not over seat or crush a primer. It has a dial for precise seating depth adjustment (.001 increments) with a hard stop to prevent over...

The quick and effective way to clean your brass is finally here with the Frankford Arsenal Brass Cleaning Packs. These packs are conveniently prepackaged and measured for cleaning 500 pieces of brass...

The Frankford Arsenal Media Transfer Magnet is ideal for handling the 304 stainless steel media pins that come with the Platinum Series Rotary Tumbler. The magnet effectively gathers and then...

Frankford's Quick-N-Ez Bullet Puller allows you to pull some bullets and this impact style tool is the easiest method. Just one stern whack and the bullet is separated from the brass. Three different...