Lee

Lee Precision 91492 Factory Crimp Die 6.5 PRC

(No reviews yet) Write a Review
SKU:
91492
UPC:
734307914929
MPN:
91492
$10.68

Description

When you’re dialing in a 6.5 PRC load for precision shooting, neck tension is the make‑or‑break factor. This Lee factory crimp die slots onto a standard 7/8 × 14 in. die holder and uses a hardened carbide ring to grip the case neck without slipping, giving you a repeatable crimp every pull. The geometry is tuned for the long, high‑BC bullets that dominate 6.5 PRC match ammo, so you get consistent bullet alignment and reliable feeding from the magazine to the chamber.

Because it’s a single‑die system, you size the case, seat the bullet, then crank the crimp—all with the same tool. That cuts down on bench time and reduces the chance of mismatched dies. Lee’s reputation for durability means the die will hold up to the high‑volume reloading cycles that competitive shooters demand, while the carbide crimp face resists the wear that softer steel dies can suffer.

The die’s 7/8 × 14 in. thread is a common standard across Lee’s die line, so it works with most of the brand’s existing holders and press setups. Pair it with a quality press and you have a streamlined, cost‑effective solution for building match‑grade 6.5 PRC ammunition that performs lap‑after‑lap.

Key features

  • 7/8 × 14 in. Thread – Fits standard Lee die holders; the generous thread ensures a solid, repeatable connection during crimping.
  • Carbide Crimp Ring – Hard‑facing resists wear and maintains consistent bite on the case neck, preventing bullet setback or roll‑out.
  • Single‑Die Design – Eliminates the need for multiple dies—size, seat, then crimp with one tool, speeding up the reloading workflow.
  • Optimized for 6.5 PRC – Designed to handle the high‑BC bullets common in 6.5 PRC match and long‑range rifles, delivering uniform tension.
  • Field‑Tested Reliability – Lee’s factory‑crimp geometry has been proven in competition rifles for dependable feeding and chambering.
  • Premium Reloading Die – Built to Lee’s quality standards, the die offers smooth operation and long service life for frequent shooters.

Specifications

BrandLee Precision
Caliber / Gauge6.5 PRC
Product nameFactory Crimp Die 6.5 PRC
Model / MPN91492
UPC734307914929
Thread size7/8 × 14 in.
Die typeFactory Crimp Die
Material (crimp face)Carbide
Quantity per package1
Package SKU (retailer)827861

What’s included

  • 1 × Lee Precision Factory Crimp Die 6.5 PRC (MPN 91492)

Good to know

  • Requires a compatible 7/8 × 14 in. die holder; not included.
  • Best results achieved after properly sizing the case to 6.5 PRC specifications before crimping.
  • Carbide crimp face resists wear, but avoid excessive over‑crimping to preserve case neck integrity.
View AllClose

Additional Information

Brand:
Lee
Cartridge (SAAMI):
6.5 PRC
Die Type:
Crimping
Material:
Steel
Model:
Factory
Primary Application:
Hunting Medium Game
Series:
Crimp Die
GTIN / UPC:
734307914929
Packaging Type:
EA
Package Quantity:
1
View AllClose

0 Reviews

View AllClose