Lee

Lee Precision 92006 Factory Crimp Die LTD. PROD. 7mm PRC

(No reviews yet) Write a Review
SKU:
92006
UPC:
734307920067
MPN:
92006
Width:
1.70 (in)
Height:
1.50 (in)
Depth:
4.90 (in)
$13.37

Description

When you’re pulling a 7mm PRC load, the crimp is the last step that locks the bullet in place before the powder ignites. Lee’s Factory Crimp Die for 7mm PRC (MPN 92006) is machined from solid steel and shaped to the cartridge’s exact dimensions, so the case mouth is squeezed uniformly every time you run a press cycle. That firm crimp raises the start pressure, which translates into tighter groups—especially important with the higher‑velocity PRC loads that can be finicky on the bench. The die is a single‑piece unit that bolts straight onto any Lee reloading press that accepts standard 7‑mm dies. No extra sleeves or adapters are required; just torque it to the manufacturer’s spec and you’re ready to go. Because it’s built from hardened steel, the die resists wear and maintains its tolerances even after hundreds of crimp cycles, meaning you won’t have to replace it after a short run. Packaged alone (EA), the die arrives with a brief instruction sheet and the official UPC 734307920067 for easy ordering. Whether you’re loading a few rounds for target practice or a full box for a competition match, this die gives you the consistent, high‑pressure crimp that Lee’s testing shows improves accuracy over generic crimp tools.

Key features

  • Steel construction – Durable steel body stands up to repeated press cycles without deformation, ensuring consistent crimping over the life of the die.
  • Factory‑crimp design – The die’s geometry is tuned to the 7mm PRC case dimensions, providing a tighter crimp than generic dies and helping maintain bullet alignment.
  • All‑purpose application – Works with any Lee press that accepts standard 7‑mm dies, making it a versatile addition to a reloading bench.
  • Single‑piece die – No separate components to lose; install directly into the press and tighten to the recommended torque for optimal performance.
  • Packaged singly – Each box contains one die, ready for immediate use with the included instruction sheet.

Specifications

BrandLee
Caliber / Gauge7mm PRC
Product name7mm PRC Factory Crimp Die
Model / MPN92006
UPC734307920067
Cartridge (SAAMI)7mm PRC
Die TypeCrimping
MaterialSteel
ModelFactory
Primary ApplicationAll Purpose
SeriesCrimp Die
Packaging TypeEA
Package Quantity1

What’s included

  • 1 × Lee 7mm PRC Factory Crimp Die (MPN 92006)

Good to know

  • Fits any Lee reloading press that accepts standard 7‑mm dies; verify press compatibility before purchase.
  • Torque the die to Lee’s recommended specification (usually found in the press manual) to achieve the proper crimp depth.
  • Store the die in a dry environment; steel can rust if exposed to moisture over long periods.
  • The die is sold singly; if you need multiple dies for a larger press setup, order additional units separately.
View AllClose

Additional Information

Brand:
Lee
Cartridge (SAAMI):
7mm PRC
Die Type:
Crimping
Material:
Steel
Model:
Factory
Primary Application:
All Purpose
Series:
Crimp Die
GTIN / UPC:
734307920067
Packaging Type:
EA
Package Quantity:
1
View AllClose

0 Reviews

View AllClose