Lee

This Factory Collect Style Die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload. Bullets do not need a crimp...

Lee’s ingot mold casts 1/2 and one pound ingots and is ideal for remelting and alloying. It is constructed of aluminum with a wood handle that stays cool.

Lee Precision's Molds for pistol calibers are double cavity to speed casting. They are made from aluminum because of the exceptional molding properties, and most bullets from Lee molds can be used as...

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee Safety Scale is reliable, very accurate and simple to use. The beam is made from a tough phenolic material that ensures long lasting accuracy. It is sensitive and readable to 1/20 grain with a...

Quick change shell plates allow you to change from one caliber to another in a matter of minutes. When changing to another caliber with a different primer size, be sure to order the Pro 1000 primer...

Lee's Aluminum 4-hole Turret for quick caliber change is compatible with the 4-Hole Turret Press and Classic Turret Press. This 4 hole turret will not fit inside the Pro 1000 or 3 Hole Turret Press.

An outstanding value, the Lee Precision Breech Lock Reloader Press is a single stage 'C' frame reloading press with an exclusive balanced lever design that prevents pinching fingers. Features...

Lee 6 Cavity Block produces a .356 diameter 125 grain round nose bullet suitable for cartridges like 9mm Luger, 38 Super Auto, 380 Auto, etc. Bullet mold lube and handles sold separately.

Lee Precision's Molds for pistol calibers are double cavity to speed casting. They are made from aluminum because of the exceptional molding properties, and most bullets from Lee molds can be used as...

Lee Cutter and Ball Grip makes case prep easier and more comfortable. Used with the Zip Trim. The ball grip is made to fit ergonomically in the palm of the hand making case preparation with Lee case...

Lee's Loader is a complete reloading system, kit includes everything needed to reload your 45 Auto, except rubber mallet. Please note: The Classic Lee Loader neck sizes only. This is not recommended...

Grips the shell for a firm fit in the press during reloading or priming operations. Will fit the Auto Prime and Auto Prime II.

The Lee Precision 90176 Carbide 3-Die Set in 9mm Makarov is a high-quality reloading tool designed for precision and durability. Made by Lee Precision in the United States, this die set is...

Lee 45 COLT Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.265 to 1.285 inches.

Lee 7.62X54 RUSSIAN Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.094 to 2.114 inches.

Lee 220 SWIFT Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.185 to 2.205 inches.

Lee's Pro 1000 progressive 3-hole reloading kit for 38 Super includes press, dies (full length size, powder through expanding and bullet seating dies), 3-hole turret, #14 shell plate, Pro Auto-Disk...

The Lee deluxe handgun 4-die set is a great set of reloading dies for precision ammunition reloading for 40 S&W and 10mm Auto. It includes carbide full length sizing die with decapping unit,...

Lee's Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The...

The Lee Precision Universal Decapping Replacement Pin (Part 90783) is a replacement decapping pin for Lee universal decapping setups. It provides a direct replacement when your existing pin becomes...

Lee's Steel 3-Die Set for handgun calibers consists of a full-length sizing die (requires case lubrication), bullet seating die, and powder through expander die. It includes a Universal Shell Holder,...

Lee's Short Charging Die is for use with the Lee Auto-Disk, Pro Auto-Disk and Auto-Drum Powder Measure. It works with cases .860 to 1.760 inches long (22 Hornet to 223 Rem), and bullet diameter .223...

Lee's Carbide 3-Die Set includes Carbide Full Length Sizing Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and instructions/load data.

The Lee Powder Through Expanding Die in .45 ACP / .45 Winchester Magnum (Lee part no. 90585) combines two reloading steps into one station: it expands the case mouth to accept a bullet while...

Lee Precision 90569 Carbide 3-Die Set includes Carbide Full Length Sizing Die, Powder Through Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper, and Instructions/Load Data...

Grips the shell for a firm fit in the press during reloading or priming operations. Universal shell holder used in most brands of reloading presses. Not for use with the Auto-Prime.

The Lee Precision Magnum Melter (MPN 90949, UPC 734307909499) is an electric melter with a large 4-inch diameter pot allowing easy access for the ladle caster. It features a high-efficiency design...

The Lee Precision 90600 Breech Lock Quick Change Bushing is an essential reloading accessory that enables fast die changes on Lee presses without losing adjustment settings. Manufactured from durable...

The Lee Precision Classic 4-Hole Turret Press is crafted from durable cast iron with solid steel linkage and a smooth hardwood-grip lever for reliable, effortless operation. It is designed to handle...

Lee's Pro Auto Disk Powder Measure has Elastomer wiper and teflon coated metal casting which makes this the smoothest operating measure. It will not cut powder and almost totally eliminates leakage...

Lee's Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a roll style crimp. The...

This die body works with Lee's Deluxe Quick Trim Case Trimmer to quickly and precisely trim brass to the correct length at the same time it chamfers the inside and outside of the case mouth. No...

Lee Precision Classic Turret Press Kit 90304 offers a heavy-duty 4-hole turret press with auto-indexing for most rifle calibers and fast handgun reloading at over 250 rounds per hour. It includes the...

The Classic Lee Loader 45 Colt is a complete reloading system kit that includes everything needed to reload the 45 Colt cartridge except a mallet. It is compact, affordable, and designed for novices...

Lee's Loader is a complete reloading system, kit includes everything needed to reload your 303 British, except rubber mallet.

Grips the shell for a firm fit in the press during reloading or priming operations. Will fit the Auto Prime and Auto Prime II.

Lee 30M1 CARBINE Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 1.280 to 1.290 inches.

The Lee Precision 90122 Case Length Gauge is a precise, easy-to-use tool designed for handloaders working with 250 Savage brass. It includes a steel case length gauge and matching shell holder,...

Lee 243 WIN Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.025 to 2.045 inches.