Bravo Company USA

2 different types of ambidextrous sling mounting options, including QD swivel sockets. Longer overall length to fit longer ''MilSpec'' diameter AR10/A5/Intermediate receiver extensions. Storage...

Three, six-hole KeyMod mounting surfaces (10:30, 1:30, and 6:00). Aluminum heat shield reduces heat transfer to the handguard and shooters' hand. The PKMR will only fit a triangle M16 type handguard...

The strongest light-weight polymer stock available for your mil-spec receiver extension. Modular VBOST (Vehicle Borne Operations Sling Tab) ‚œ This tab interfaces with the shooter's riggers' band or...

Aggressive texture. Storage inside the grip. Requires three KeyMod attachment hole mounting points. Spring-loaded clamps makes installation and removal easier. Made in the U.S.A., manufactured from...

Should be installed by a qualified armorer. Extended version of the BCMGUNFIGHTER MOD 0 - 5.56. Mount per BATF specs to bring your 14.5 inch barrel over 16 inches (non-NFA). Threaded 1/2 x 28 for 5...

The KAG is the end result of collaboration between BCM and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry...

The KAG is the end result of collaboration between BCM and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry...

All the advantages and features of Bravo Company's KeyMod Rail, now available in 100% aluminum. Manufactured from aluminum, it is lightweight yet durable. Also featuring a proprietary patent pending...

The Gun Fighter's Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances. Each grip includes both an extended modular insert to close the gap...

Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK...

BCMGUNFIGHTER Vertical Grip Mod 3, M-LOK Compatible

Can be cut to any length, depending on users requirements. Made in the U.S.A. of a high-strength polymer material. Each Kit contains five panel strips.

Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit. Modular VBOST (Vehicle Borne Operations Sling Tab) ‚œ This tab interfaces with the...

The strongest light-weight polymer stock available for your mil-spec receiver extension. Modular VBOST (Vehicle Borne Operations Sling Tab) ‚œ This tab interfaces with the shooter's riggers' band or...

Bravo Company manufacturing has gained quite a cult like following due to the fact that BCM takes quality control to a new level. BCM is know for strict tolerances and extremely high quality control...

The strongest light-weight polymer stock available for your mil-spec receiver extension. Modular VBOST (Vehicle Borne Operations Sling Tab) ‚œ This tab interfaces with the shooter's riggers' band or...

2 different types of ambidextrous sling mounting options, including QD swivel sockets. Longer overall length to fit longer ''MilSpec'' diameter AR10/A5/Intermediate receiver extensions. Storage...

Stripped carrier is finished in an Ion Bonded Flat Dark Earth. Lowers friction and cleans easier. BCM (MPI) complete bolt carrier group is fully assembled. (BCG) Bolt carrier group (auto version)...

The KAG is the end result of collaboration between BCM and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry...

The new (United States Patent 9,709,358) BCM Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol...

Featuring the same industry leading barrel nut and lock up design as originally introduced on BCM's evolutionary KMR handguard, the QRF Series of handguards gives the shooter modularity in the...

BCM RAIDERM10556BL RAIDER-M13 Rail Black Anodized 10.00" M-LOK Free-Floating Style Made of Aluminum for AR-Platform

BCM RAIDERM13556BLK RAIDER-M13 Rail Black Anodized 13.00" M-LOK Free-Floating Style Made of Aluminum for AR-Platform

BCM AT OPTIC RISER 525-13X5

BCM AT OPTIC RISER 525-5

MK2 Buffer Black - MOD1 - T4 - Intermediate Length - Lessens felt recoil, without compromising reliability - Provides a more consistent carrier velocity, which can aid in accuracy, reliability over...

MK2 Buffer Black - MOD1 - T3 - Intermediate Length - Lessens felt recoil, without compromising reliability - Provides a more consistent carrier velocity, which can aid in accuracy, reliability over...

Grip Mod 3-KD Black - Reduced Grip angle keeps wrist in line with trigger for improved ergonomics and trigger control - Short/Low-profile design ideal for sub-compact carbine/pistol configurations -...

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

This kit contains all the necessary parts to mount to your Mil-Spec dimension stock assembly to your Mil-Spec lower receiver: MK2 Mod 1 - T1 Buffer (weight = approximately 4.7oz) Mil-Spec M16A4...

This kit contains all the necessary parts to mount to your Mil-Spec dimension stock assembly to your Mil-Spec lower receiver: MK2 Mod 1 - T0 Buffer (weight = approximately 3.8oz) Mil-Spec M16A4...

MK2 Buffer Black - MOD1 - T2 - Intermediate Length - Lessens felt recoil, without compromising reliability - Provides a more consistent carrier velocity, which can aid in accuracy, reliability over...

MK2 Recoil Mitigation System Black - Mod 1 - T2 - Lessens felt recoil, without compromising reliability - Provides a more consistent carrier velocity, which can aid in accuracy, reliability over...

MK2 Receiver Extension Black - BCM MK2 Receiver Extension for your AR15, M16, M4 - Machined from 7075-T6 and manufactured to Mil-Spec dimensions and specifications - These tubes should be used with...

MK2 Buffer Black - MOD1 - T1 - Intermediate Length - Lessens felt recoil, without compromising reliability - Provides a more consistent carrier velocity, which can aid in accuracy, reliability over...