Matchgrade Bushing .313, UPC : 090255593136 UPC: 090255593136

The Hornady Match Grade Bushing is required for use with the Hornady Neck Sizing die. It is a self-centering, interchangeable bushing for extreme precision in neck sizing. br /br /Notes:br /br /- Bushing fits in Hornady Match-Grade full length and neck sizing diebr /- Bushing is self-centering in die bodybr /br /Use of Hornady Match Grade Neck and Full Length Dies and Bushings:br /br /- Hornady Match Grade dies have a separate, interchangeable neck size bushing (not included with die).br /- The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.br /- Standard dies size to SAAMI minimum specification and this is often not necessary, as a particular rifle, brass type and chamber may not need br / minimum dimensions. Less sizing results in less working of the brass.br /- Using some loaded or dummy cartridges that fit the rifle's chamber without excessive play, measure the diameter of the case neck. Subtract br / .001" from that diameter and the result should be a reasonable starting point for the correct bushing dimension. Select a size that is at that dimension or just under it.br /- Bushings work in both the neck and full length Match Grade dies. The bushings are available in .002" increments.br /- The 242, 244, 246 and 248 bushings are for the 223 Remington and 22-250 Remington cartridges.br /- The 260, 262, 264 and 266 bushings are for the 6mm PPC and 243 Winchester cartridges.br /- The 332, 334, 336 and 338 bushings are for the 308 Winchester cartridge.br /br /Specifications:br /br /- Finish: Polished Steelbr /- Diameter: 0.313 Inches