Wilson Combat 5792 UltimaLube II Grease Lubricates 2 oz Squeeze Bottle UPC: 874218006099

Wilson Combat Ultima-Lube II Grease

Wilson Combat Ultima-Lube II is a blend of petroleum and synthetic lubricants specially formulated to insure optimal performance of any firearm and inhibit wear.Ultima-Lube II GreaseIdeal for Heavy Wear AreasStays Put Under Extreme Conditions40° to 350° F Temperature RangeRecommended for Full and Semi-Auto Rifles and Carbines, Optimal in AR Style Rifles at Temperatures Above 50° FWilson Combat Ultima-Lube II is a blend of petroleum and synthetic lubricants specially formulated to insure optimal performance of any firearm and inhibit wear. The unique blend of lubricating fluids has proven ideal for today's high-tech semi-auto weapons, whether manufactured of conventional steels, aluminum alloys or stainless steel. In addition, we have found nothing superior to Ultima-Lube II for the proper lubrication and protection of the hand-fit custom firearms that Wilson Combat is known for.Ultima-Lube II is Available in Four Formulations:; Ultima-Lube II Lite Oil - Very low viscosity. Ideal for extreme cold weather use. Recommended Uses: Tightly fitted handguns of minor caliber. Ultima-Lube II Oil - Thin viscosity penetrates hard to get to areas. Ideal for cold weather use, 10° to 350° F temperature range. Recommended Uses: Tightly fitted handguns of all types.Ultima-Lube II Universal - All purpose lube for all types of firearms. Stays put under extreme conditions, 40° to 350° F temperature range. Recommended Uses: Service pistols/revolvers and broken-in custom handguns, Long guns of all action types, AR style rifles in the 20° to 50° F temperature range.Ultima-Lube II Grease - Ideal for heavy wear areas. Stays put under extreme conditions, 40° to 350° F temperature range. Recommended Uses: Full and Semi-Auto rifles and carbines, Optimal in AR style rifles at temperatures above 50° F.General Recommendations on Lubricating Firearms:ALWAYS wear safety glasses when disassembling or reassembling any firearm!Do NOT over lube!!!Once your firearm is broken in, lube only those areas where you see visible wear, lubricating areas that don't have contact will only attract debris and fouling.After lubrication and re-assembly, cycle the firearm several times and wipe off any excess lubricant that may seep out. If you have lubed properly this should be minimal.For firearms that will be used at constant temperatures below 10° F, we recommend you use a very light coat of a very thin lubricant like Break Free CLP or FP-10.Ultima Lube II Grease MSDS;

Specifications for Wilson Combat Ultima-Lube II Grease:

Container Volume: 2 oz

Package Contents:

Wilson Combat Ultima-Lube II Grease