Long Gun Parts

KAK Industry was founded and incorporated in 2011 by Kurt Kosman to address a gap in the firearms market for quality, American-Made components at affordable, sustainable prices.Features :AR 15 Basic Build Kit

KAK Industry, Field Repair Kit, Black

Kit includes the following: Takedown Pin, Pivot Pin, Pin Detent x2, Detent Spring x2, Ambidextrous Safety Selector, Safety Detent, Safety Detent Spring, Buffer Retainer, Buffer Retainer Spring, Bolt Catch, Bolt Catch Plunger Spring, Bolt Catch Plunger,...

The Seekins Precision DNA Charging Handle offers a full body and textured grip surface to improve user controls.Features :Textured Grip SurfaceNon-AmbiErgonomic Fit and Function

Standard AR15 Trigger Guard.Features :Fits AR-15Trigger GuardStandard

The Geissele Ultra Duty Lower Parts Kit is made for the most demanding operators and includes all the internal parts necessary to complete or rebuild your lower receiver. Key components are made from Stainless Steel, which offers a much longer life-span...

High quality components and precise manufacturing make Advance Tech parts ideal for maintaining and upgrading firearms. The durability, reliability and excellent build quality of these parts will ensure years of service you can count on.Features :Precise...

LBE Gas Tubes are made from 304SS seamless tubing and include a gas tube roll pin. Made in the USA.Features :Fits AR-15Gas TubeCarbine LengthMade in the USA

Simple and sturdy, the Adaptive Receiver Mounted Shell Carrier for Mossberg keeps six 12 gauge shells at the ready. No need to fumble for shells, just quickly and conveniently reload right from the side of the receiver. Whether for home defense, sport...

Precision machined from 304 Stainless Steel, CMC gas tubes have an extremely durable Nitride finish that increases corrosion resistance, wear resistance, fatigue strength and cosmetic appeal while ensuring consistent gas flow to help your rifle cycle...

If you're looking for the highest quality and most durable Lower Parts Kit on the market with all of the upgrades, look no further. The Spike's Tactical Enhanced LPK was designed for the end user who demands the most longevity possible out of the parts...

If you're looking to shoot suppressed or just fine tune your AR to your preferred ammo, the CMMG ZEROED Adjustable Gas Block gives you the freedom to dial in the gas system exactly to your liking. The sacrificial cleanout chamber and user-serviceable...

The Phase 5 (EBRv2/308) gives the operator the ability to reload quicker, clear jams in a more efficient way and eliminate unnecessary hand movements during various operations. For DPMS type 308 rifles.Features :Rugged ConstructionLightweightFits...

LBE Gas Tubes are made from 304SS seamless tubing and include a gas tube roll pin. Made in the USA.Features :Fits AR-15Gas TubePistol LengthMade in the USA

The B5 Systems Bravo trigger guard offers a drop in upgrade over the standard AR trigger guard. The enlarged profile allows for glove use in cold weather or tactical operation. Proudly made in the USA.Features :Made of composite materials.Installs via...

High quality components and precise manufacturing make Lantac parts ideal for maintaining and upgrading firearms. The durability, reliability and excellent build quality of these parts will ensure years of service you can count on.Features :Precise...

When mounted to your existing bolt catch, the Phase 5 Extended Bolt Release (EBRV1) helps clear jams and double feeds efficiently during magazine reloads while allowing faster operation. The release feature allows the shooter to swipe the toggle in the...

The patented TacStar Sidesaddle mounts extra rounds on your shotgun in a convenient and accessible location for fast reloading. The tough, weatherproof shell carrier is attached to an aluminum mounting plate that installs directly on the shotgun receiver...

LUTH-AR stainless steel rifle length gas tube.Features :Fits AR-15Rifle LengthGas Tube

AR15 Complete Lower Parts Kit. Perfect for your next custom build.Features :Complete Parts KitFits AR-15Includes A2-Grip and Trigger Guard

AR15 Lower Parts Kit-No Pistol Grip or Trigger Guard. Perfect for your next custom build.Features :Lower Parts KitNo Grip or Trigger GuardPins/Screws/Springs/Parts

The Raptor is truly revolutionary in design & function. From rapid palm blading or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and MILSPEC anodized...

The Slimline Sidesaddle utilizes a non-glare, anodized aluminum backing plate material similar to the traditional Sidesaddle. It is contoured so that it takes up less space on the receiver and has fewer areas that could potentially snag. Additionally,...

The Magpul SSG Selector Set are drop-in, dual sided selectors for the FN SCAR family of weapons. Designed at the request of a deploying military unit who wanted more positive control of the selector, the SSG are compatible with military-issue select fire...

KAK Industry was founded and incorporated in 2011 by Kurt Kosman to address a gap in the firearms market for quality, American-Made components at affordable, sustainable prices.Features :Mil-Spec Trigger GroupKAK Billet Trigger GuardStandard A2...

The Magpul Bolt Action Magazine Well 700L Standard is a drop-in detachable box magazine solution for our Hunter 700L Stock. By simply removing your OEM bottom metal from the Hunter 700L, users can add this reinforced polymer trigger guard and magazine...

Experience faster and smoother charging on your AR-15 with the RISE Ambidextrous Charging Handle. The ambidextrous latches facilitate quick and easy charging, even if you're wearing gloves or have optics mounted on your rifle. The latches feature...

With its innovative, patent-pending design, the RISE Ambidextrous Safety Selector will enhance the functionality and reliability of your AR-15, AR-10, or AR9. Chasing after a safety detent or spring is a thing of the past as those small parts are...

Secure and open your AR-15's upper and lower with confidence and ease thanks to the RISE Enhanced AR-15 Takedown and Pivot Pins. Your finger or thumb will fit into the concave and contoured face of these pins, even with gloves on, so you can quickly and...

High quality components and precise manufacturing make Armaspec parts ideal for maintaining and upgrading firearms. The durability, reliability and excellent build quality of these parts will ensure years of service you can count on.Features :Precise...

The Talon 45/90 ambidextrous safety selector is a modular design that can be installed as a standard 90 Degree or as a 45 Degree short throw by simply rotating the shaft 180 Degree inside the lower receiver. Selector levers install using a precision...

LUTH-AR charging handle for AR-15.Features :Fits AR-15Charging HandleLuth-AR

This is the LBE .750 Steel Nitride Finished Low Profile Gas Block with Mid-Length Gas tube Installed. Gas tubes are made from 304SS Seamless Tubing. Made in the USA.Features :Fits AR-15Low-ProfileNitride FinishMade in the USA

The LBE AR15 mag release button is made in the USA.Features :Fits AR-15Mag release ButtonMade in the USA

This is a 10-pack of LBE AR-15 buffer retaining pins. Made in the USA.Features :Fits AR-15Buffer Retaining PinsMade in the USA

Precision machined from 304 Stainless Steel, CMC gas tubes have an extremely durable Nitride finish that increases corrosion resistance, wear resistance, fatigue strength and cosmetic appeal while ensuring consistent gas flow to help your rifle cycle...

The Breek Arms WARHAMMER Mod2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the...

The Enhanced Trigger Guard is a black anodized aluminum drop in replacement for the AR15/M4 weapons platform. It features a shallow V shape for better use of gloves in tactical shooting or cold weather operations. The Enhanced Trigger Guard is...

The Seekins Precision DNA Charging Handle offers a full body and textured grip surface to improve user controls.Features :Textured Grip SurfaceNon-AmbiErgonomic Fit and Function

The B5 Systems Bravo trigger guard offers a drop in upgrade over the standard AR trigger guard. The enlarged profile allows for glove use in cold weather or tactical operation. The trigger guard also maintains the original swing down function for use...

LUTH-AR 10-Pack of takedown pin detents and detent springs.Features :10-Detents10-Detent SpringsFits AR-15

This is the LBE .750 Steel Nitride Finished Low Profile Gas Block with Carbine Length Gas tube Installed. Gas tubes are made from 304SS Seamless Tubing. Made in the USA.Features :Fits AR-15Low-ProfileNitride FinishMade in the USA

The silencer-optimized Raptor-SD features a ported shaft designed to redirect gasses down and forward, away from the shooter's face when shooting suppressed. Its ambidextrous design allows rapid palm blading or finger-thumb charging of the weapon,...

Introducing the Sledgehammer AR-15 Charging Handle by Breek Arms. The Sledgehammer is the ultimate solution for enthusiasts and professionals seeking top-tier performance and unparalleled reliability, especially when shooting suppressed. Crafted with...

The Magpul AR Enhanced Magazine Release provides an enlarged contact surface for quick and fumble free magazine changes. With easy bolt-on installation with no gunsmithing required, the Enhanced AR Magazine Release is made of Mil-Spec hard anodized...

This gas block replaces your existing front sight to provide a simple, low profile design that can be used to mount a rifle length forearm to a carbine length barrel. It is mounted by the use of two clamping screws.Features :".750";"Phosphate Coated"Steel

The LBE .308 barrel nut is made from 4130 steel and has a Phosphate finish. Made in the USA.Features :.308 Barrel Nut4130 SteelPhosphate Finish

The Breek Arms WARHAMMER MICRO MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with...

Make removing that rotary magazine a snap! TacSol's Extended Magazine Release (EMR) easily assembles on to any Ruger 10/22 Rifle. Absolutely NO gunsmithing required.Features :Fits Ruger 10/22Easy InstallationExtendedProvides Better Contact

GrovTec's inception starts when Bob Grover started working for Michaels of Oregon in 1987. He began working for Michaels in the recoil pad/scope cover department and then moved on to the Machine Shop. He held the roles of Black Oxide Finisher, Machine...

The Ambidextrous Magazine Release replicates the feel and length of a standard magazine release button but also accommodates left-handed shooters and one-handed magazine changes. This magazine release is constructed of rugged machined billet tool steel...

This is a 10-pack of LBE AR-15 take down detents. Made in the USA.Features :Fits AR-15Take Down DetentMade in the USA

The AR-10 / LR-308 WARHAMMER MOD2 ambidextrous charging handle! The WARHAMMER is an incredibly affordable upgrade compared to other 308 charging handles in the market without sacrificing the quality that Breek Arms is proud of. The Warhammer will...

BCM GUNFIGHTER Trigger Guard for your AR15, M16, M4 style rifle.Features :Ergonomically correct shape and contour"No sharp edges, Compatible with "duck-billed" grips"Made of impact resistant polymer

This is a 20-pack of AR-15 selector detent springs made from Hi Tensile Music Wire. Made in the USA.Features :Fits AR-15Hi Tensile Music WireMade in the USA

This lower receiver parts kit for AR-15 is a great addition to your AR15 build. From amateur gun builder to seasoned expert gun smith, this lower parts kit is for you. NOTE: Fire control group and grip NOT included. Kit contains the following: 1.Bolt...

Introducing the Talon-GI, Radian is pleased to offer a variant of their Talon 45/90 safety selector that features no weak side lever, for those who prefer this configuration to an ambidextrous setup. The Talon-GI comes with one long lever that is...

The Breek Arms WARHAMMER MICRO MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with...

If you are looking for a high quality gas tube, look no more. These are the same gas tubes that Spike's installs on their ST-15 rifles and complete upper receivers.Features :Mil-Spec 304 Stainless SteelBlack Nitride FinishStainless Steel Roll Pin

If you are looking for a high quality gas tube, look no more. These are the same gas tubes that Spike's installs on their ST-15 rifles and complete upper receivers.Features :Mil-Spec 304 Stainless SteelBlack Nitride FinishStainless Steel Roll Pin

The Enhanced Ejection Port Cover is a drop-in upgrade designed to provide an improved installation process, physical strength, and corrosion resistance over the standard USGI ejection port cover. Traditional stamped steel ejection ports are malleable,...

This is a 10-pack of LBE AR-15 buffer retaining pin springs. Made in the USA.Features :Fits AR-15Buffer Retaining Pin SpringsMade in the USA

Utilizing the same patented ambidextrous functionality as its predecessor, the Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate...

The Breek Arms WARHAMMER Mod2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the...

This standard .308 charging handle is made of forged 7075 Aluminum and is made in the USA.Features :.308 Charging HandleForged 7075 AluminumStandard Latch

From upper receivers and bolt carrier groups to barrels, grips, gas tubes, buffer tubes, springs, and more, every LBE component is designed and built right here in the United States. They take immense pride in supporting American jobs, maintaining...

The SA5 was designed and tested with professionals and protectors in mind. Turn your AR into a compact, concealable platform with a folding stock adapter built to outlast your rifle. Made in the USA, the SA5 is lightweight and 250% stronger than their...

The DPMS Panther Claw Custom Drop-In AR Single-Stage Curved Bow Trigger is engineered to the highest quality standards. With its convenient drop-in design, even newcomers to the AR world can integrate this into their build for an easy and significant...

Everything you need for your custom build, and nothing you don't. Just the basics from KAK.Features :Bolt Catch KitMagazine Catch KitTakedown Pin/Detent/SpringPivot Pin/Detent/SpringBuffer Retainer Pin/SpringAmbi Selector/Detent/SpringHammer and Trigger...

From upper receivers and bolt carrier groups to barrels, grips, gas tubes, buffer tubes, springs, and more, every LBE component is designed and built right here in the United States. They take immense pride in supporting American jobs, maintaining...

From upper receivers and bolt carrier groups to barrels, grips, gas tubes, buffer tubes, springs, and more, every LBE component is designed and built right here in the United States. They take immense pride in supporting American jobs, maintaining...

From upper receivers and bolt carrier groups to barrels, grips, gas tubes, buffer tubes, springs, and more, every LBE component is designed and built right here in the United States. They take immense pride in supporting American jobs, maintaining...

The LBE Extreme Field Repair Kit comes with the following US Made Parts; (3) Firing Pin Retaining Pins, Firing Pin, (2) Takedown Detents, Disconnector Spring, Extractor O-Ring, Extractor Spring, (2) Hammer/Trigger Pins, Gas Tube Roll Pin, Extractor Pin,...

Take your AR15 to the next level with the patent pending Faxon Low-Profile Adjustable Gas Block, designed for unparalleled control and reliability. With a unique adjustment screw placement that prevents contact with gas port carbon, this gas block...

Take your AR15 to the next level with the patent pending Faxon Low-Profile Adjustable Gas Block, designed for unparalleled control and reliability. With a unique adjustment screw placement that prevents contact with gas port carbon, this gas block...

The Strike Shotgun Barrel Clamp for the Beretta 1301 Tactical and A300 Ultima Patrol helps to add strength and rigidity to your feed tubs with the ability to add accessories and a sling point. One side of the barrel clamp features a Picatinny rail to...

The RISE Premium Lower Parts Kit for AR-15s isn't your standard LPK. It includes all the essential pins, springs, and hardware to complete your lower, but what sets it apart are the premium RISE Armament components that elevate your rifle's performance...

KAK Industry was founded and incorporated in 2011 by Kurt Kosman to address a gap in the firearms market for quality, American-Made components at affordable, sustainable prices.Features :Complete Forward Assist Button with ClawForward Assist Helical...

The suppressor-optimized Raptor-SD features a ported shaft designed to redirect gasses down and forward, away from the shooter's face when shooting suppressed. Its ambidextrous design allows rapid palm "blading" or finger-thumb charging of the weapon,...

Manufactured from tough stainless steel, these gas tubes can take anything you throw at them, including full-auto fire.Features :Carbine Length Gas TubeCompatible with both AR-15 and AR-10/LR-308 systemsBright StainlessIncludes Installation Roll Pin

Finish your next AR build, or have a backup "Oops!" kit, with the DPMS Lower Parts kit. Does not include fire control group, grip, or stock.Features :Takedown & Pivot Pin AssemblyBolt Catch AssemblyMagazine Catch AssemblySafety Selector AssemblyEnhanced...

The CMC Trigger Anti-Walk Pin Set is easy to install and includes installation instructions with each set.Features :".154" x .885""Easy to InstallInstallation Instructions Included

Manufactured from tough stainless steel, these gas tubes can take anything you throw at them, including full-auto fire.Features :Rifle Length Gas TubeCompatible with both AR-15 and AR-10/LR-308 systemsBright StainlessIncludes Installation Roll Pin

This is the first extended carrier ever manufactured from one solid piece of SAE 304 Stainless Steel, which eliminates the need for welding with intended shotguns. It is heat-treated, and extremely polished, providing optimal performance. The TTI Benelli...

Manufactured from tough stainless steel, these gas tubes can take anything you throw at them, including full-auto fire.Features :Mid Length Gas TubeCompatible with both AR-15 and AR-10/LR-308 systemsBright StainlessIncludes Installation Roll Pin

KAK Industry was founded and incorporated in 2011 by Kurt Kosman to address a gap in the firearms market for quality, American-Made components at affordable, sustainable prices.Features :20 Position AdjustabilityEquipped With Tactile Adjustment Screw...

From upper receivers and bolt carrier groups to barrels, grips, gas tubes, buffer tubes, springs, and more, every LBE component is designed and built right here in the United States. They take immense pride in supporting American jobs, maintaining...

Introducing the Puller ambidextrous charging handle. Designed at the request of a military end user, the Charging Handle is low profile, sturdy, and a must have upgrade for any shooting style. Made from billet 7075-T6 aluminum and finished with MIL-STD...

Manufactured to the highest quality standards using correct materials, heat treatments and finishes to comply with up to date military specifications.Features :Includes Ejection Port Cover, Rod and SpringIncludes Forward Assist Assembly, Spring and Roll...

The Sledgehammer Charging Handle by Breek Arms is now in AR-10 / LR-308. The Sledgehammer is the ultimate solution for enthusiasts and professionals seeking top-tier performance and unparalleled reliability, especially when shooting suppressed. Crafted...

From upper receivers and bolt carrier groups to barrels, grips, gas tubes, buffer tubes, springs, and more, every LBE component is designed and built right here in the United States. They take immense pride in supporting American jobs, maintaining...

The parts of the OS Kit are housed in a tin with a magnetic base that keeps all the parts sorted. On the inside of the lid is a to-scale image of all the included parts so you can easily identify each spare part. From screws to pins to detents, the RISE...

From upper receivers and bolt carrier groups to barrels, grips, gas tubes, buffer tubes, springs, and more, every LBE component is designed and built right here in the United States. They take immense pride in supporting American jobs, maintaining...

The Sledgehammer Omni-Buster AR-15 Charging Handle is engineered for shooters running suppressed rifles who demand reliable gas mitigation without oversized controls. Its internal gas-management system delivers three integrated gas-reducing features for...

Kit includes the following: Bolt Catch Plunger, Bolt Catch Plunger Spring, Bolt Catch Roll Pin, Bolt Catch Set Screw (6-32, compatible with Lantac, Aero and other lowers), 1/16th Allen Key Head, Buffer Retainer x2, Buffer Retainer Spring x2, Takedown Pin...

From upper receivers and bolt carrier groups to barrels, grips, gas tubes, buffer tubes, springs, and more, every LBE component is designed and built right here in the United States. They take immense pride in supporting American jobs, maintaining...

From upper receivers and bolt carrier groups to barrels, grips, gas tubes, buffer tubes, springs, and more, every LBE component is designed and built right here in the United States. They take immense pride in supporting American jobs, maintaining...

The SA5 was designed and tested with professionals and protectors in mind. Turn your AR into a compact, concealable platform with a folding stock adapter built to outlast your rifle. Made in the USA, the SA5 is lightweight and 250% stronger than their...

The RISE AR-10 Ambidextrous Charging Handle is the ideal charging handle for both left- and right-handed shooters. Precision machined from 7075 aluminum and a black anodize finish, the RISE AR-10 Ambidextrous Charging Handle is built for performance and...

The suppressor-optimized Raptor-SD features a ported shaft designed to redirect gasses down and forward, away from the shooter's face when shooting suppressed. Its ambidextrous design allows rapid palm "blading" or finger-thumb charging of the weapon,...